1930s Rogers Peet chesterfield overcoat

http://www.ebay.com/itm/271590601506
This vintage overcoat was made in the 1930s by high-end clothier Rogers Peet. The coat was purchased at their Boston location, 104 Tremont Street, by an A. Leighton of 10 Chauncy Street, Cambridge, Massachusetts. He wore the coat until 1948, evidenced by a postal insurance form dated February 18th, 1948 and a checking deposit slip dated February 24, 1948, both found in the breast pocket and included with the coat. The coat is about as classic as they come. It is a chesterfield, with a three button fly front (rolled to the second button) and a velvet collar. It is made of some of the finest, densest wool I have felt. Absolutely the quality you would expect from Rogers Peet. It has flapped pockets and a vented back with two buttons to close the vent. The coat is luxuriantly fully lined.. There is a small button which allows the lapels to be buttoned up against the Boston winters.

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25-1/2″
Length (base of collar to hem): 42″

 photo IMG_0031edit.jpg

 photo IMG_0032-1.jpg

 photo IMG_0033-1.jpg

 photo IMG_0036-2.jpg

 photo IMG_0037-2.jpg

 photo IMG_0038-2.jpg

 photo IMG_0039-3.jpg

 photo Image48.jpg

1930s button front leather jacket

http://www.ebay.com/itm/271590579562
This vintage leather jacket was made in the 1930s. It is an early style of utility jacket, with a button front and a shirt style collar. There are handwarmer pockets with snap tab closure, and d ring adjuster belts for the back and cuffs. The jacket is cotton lined, with two buttoned “pistol pockets”, like found on G-1 flight jackets.

Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 26-1/2″

 photo IMG_0002-2.jpg

 photo IMG_0003-1.jpg

 photo IMG_0005-2.jpg

 photo IMG_0015-2.jpg

 photo IMG_0017-1.jpg

 photo IMG_0019-2.jpg

 photo IMG_0020-2.jpg

 photo IMG_0021-2.jpg

 photo IMG_0022-2.jpg

 photo IMG_0025-2.jpg

 photo IMG_0026-2.jpg

 photo IMG_0027.jpg

1930s Nite Hawks MC Detroit kidney belt

This vintage black leather kidney belt was made in the 1930s and was personalized by a member of the early motorcycle club, the Nite Hawks. This, along with the original owner’s 1930s Schott jacket (which I do not have) came out of a Baltimore, Maryland estate, although it appears that the Nite Hawks Motorcycle Club was based out of Detroit. It has wonderful round, flat, riveted studwork, and a three buckle fastening. the bottom belt has two studs.
 photo IMG_0051-4.jpg

 photo IMG_0052-2.jpg

 photo IMG_0053-2.jpg

 photo IMG_0054-4.jpg

 photo IMG_0055-3.jpg

 photo IMG_0056-2.jpg

 photo IMG_0058-1.jpg

 photo IMG_0059-3.jpg

1941 Scotch Woolen Mills peak lapel suit

http://www.ebay.com/itm/271577530184
This vintage suit was made in 1941 by the Scotch Woolen Mills, a Chicago, Illinois based tailoring company. The suit has a typically 1930s cut, with a high degree of waist supression. It is single breasted, with a two button closure and wide, pointy peak lapels. The suit is half-lined (as opposed to the more typical skeleton/petal lining of the era) in a floral jacquard fabric. The pants are zipper fly, with an early Talon zipper. They are straight cut and cuffed. The fabric is a wonderful deep burgundy with red and orange stripes. It’s a nice change from usual brown suits, and is surprisingly easy to coordinate colors with.

Jacket
Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 26″
Length (base of collar to hem): 28″

Pants:
Waist: 17″ (doubled = 34″)
Inseam: 31″
Outseam: 42-1/2″
Rise: 11-1/2″
Thigh:12″
Cuff: 10-1/2″

 photo IMG_0123.jpg

 photo IMG_0124.jpg

 photo IMG_0137.jpg

 photo IMG_0140.jpg

 photo IMG_0142.jpg

 photo IMG_0143.jpg

 photo IMG_0170.jpg

 photo IMG_0171.jpg

 photo IMG_0121.jpg

 photo IMG_0109-1.jpg

 photo IMG_0111.jpg

 photo IMG_0112-1.jpg

 photo IMG_0114-1.jpg

 photo IMG_0115.jpg

 photo IMG_0116.jpg

 photo IMG_0117-1.jpg

 photo IMG_0119.jpg

 photo IMG_0120-1.jpg

Early 1930s J C Penney sheeplined shawl collar coat

http://www.ebay.com/itm/271576023683
This vintage sheeplined coat was made in the early 1930s and was sold by the JC Penney Co. It has a nice early Penney’s label. It has a green cotton shell, with leather reinforced handwarmer and cargo pockets. As is typical of the style, it has loops instead of buttonholes. The coat is lined with sheepskin and has a sheepskin collar. Sleeves are blanket lined and there are knit storm cuffs. It appears that the sleeves were shortened at some point, exposing these cuffs.

Chest (pit to pit): 25″ (doubled = 50″)
Shoulder to shoulder: 21-1/2″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 35-1/2″

 photo IMG_0043-1.jpg

 photo IMG_0045-1.jpg

 photo IMG_0047-1.jpg

 photo IMG_0048-1.jpg

 photo IMG_0049-1.jpg

 photo IMG_0050-2.jpg

 photo IMG_0051-2.jpg

 photo IMG_0054-2.jpg

 photo IMG_0055-1.jpg

 photo IMG_0056-1.jpg

1940s Seattle Woolen Company jacket

http://www.ebay.com/itm/281409416979
This vintage jacket was made in Seattle, Washington by the Seattle Woolen Company. The company was founded in 1891 by Thomas Eddy Eyanson and produced garments for rugged outdoor wear, catering to the flood of people leaving for Alaska through Seattle. They were the first woolen mill in Washington State, and were headquartered in Kirkland Washington, directly across from downtown Seattle. After Eyanson’s death in 1908, his son Edward Eyanson took over the mill. They produced fabrics for Filson as well as selling garments under their own name. Note the extreme similarity in label design between that of The Seattle Woolen Co and CC Filson of the same period.
The jacket is a waist length cut with peak lapels and a button front. The pockets are all trimmed in leather for extra durability. There are spacious canvas pockets inside.

Chest (pit to pit): 20-1/2″
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 22″

 photo IMG_0043.jpg

 photo IMG_0044.jpg

 photo IMG_0045.jpg

 photo IMG_0050-1.jpg

 photo IMG_0051-1.jpg

 photo IMG_0054-1.jpg

1930s Montgomery Ward Pony Horsehide aviator cossack jacket

http://www.ebay.com/itm/281409286745
This vintage leather jacket was made in the late 1930s-early 1940s. It was made in California and was sold by Montgomery Ward under their Sportswear label. The “Aviator” style, a precursor to the modern motorcycle jacket, was popular in this late ’30s-1940s time period, and this is an excellent example. It has an asymmetrical / double breasted zipper design, with handwarmer pockets and double zipped breast pockets. The zippers are all Talons. The chest zippers are the originals, with ring style pulls and Talon branded sliders, a style which stopped production in the 1940s. The main zipper is a replacement, probably done in the late 1950s. Interestingly, the slider has had the pull replaced with a 1930s fan-tail pull, possibly off the original zip. The jacket has a half-belt back with teardrop shaped buckles. The jacket is fully lined, with a wonderful label with a California mission and palm tree. The jacket is made of pony horsehide.

Chest (pit to pit): 20″ (doubled = 40″)
Waist (side to side): 18″ (doubled = 36″)
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 23-3/4″
Length (base of collar to hem): 21″

 photo IMG_0009-1.jpg

 photo IMG_0010-1.jpg

 photo IMG_0038.jpg

 photo IMG_0035-1.jpg

 photo IMG_0018-1.jpg

 photo IMG_0039.jpg

 photo IMG_0023.jpg

 photo IMG_0041.jpg

 photo IMG_0042.jpg

1930s Red Hudson’s Bay Company point blanket mackinaw coat

http://www.ebay.com/itm/281406858780
This vintage coat was made in the 1930s from Hudson’s Bay Company point blankets. It is a classic double breasted mackinaw cut. At some point, the coat was fully lined, but where it is coming away, you can see the taped seams and hanger loop which give away the original unlined construction, which was typical on blanket mackinaws of the era.

Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 21″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 31″

 photo IMG_0219.jpg

 photo IMG_0228.jpg

 photo IMG_0229.jpg

 photo IMG_0231.jpg

 photo IMG_0233.jpg

 photo IMG_0235.jpg

 photo IMG_0237.jpg