http://www.ebay.com/itm/401086957586?
http://www.ebay.com/itm/401023017182
This vintage workwear jacket was made in the late 1930s-1940s. It has a mid-late 1940s Talon zipper, but the stitching is crude and doesn’t match the rest of the stitching on the jacket, so it is very likely a replacement. The jacket is made of heavyweight twill, with handwarmer pockets, a breast pocket, half-belt back and side adjuster belts.
Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 23-1/4″
Length (Base of collar to hem): 22-1/2″
http://www.ebay.com/itm/271983398791
This vintage jacket was made in the late 1940s-early 1950s, probably in the midwest USA. It is made from beautiful, soft, resilient deerskin leather, with front and back yokes, side adjuster belts and buttoned patch pockets. It has a spring loaded Crown zipper.
Chest (pit to pit): 22-1/2″ (doubled = 45″)
Shoulder to shoulder: 18-1/4″
Sleeve (shoulder to cuff):25-1/2″
Length (base of collar to hem): 25-1/2″
http://www.ebay.com/itm/272003589557
This vintage jacket was made by Pine Crest Outerwear immediately post-war, probably 1946-1948. It is a classic pre-war cossack style, unlined, with handwarmer pockets, a zip breast pocket, zip front, and half belt back with low slung side adjuster belts. It has a spring loaded Crown zipper with two way teeth for the main zip and a early style bar-connection ring pull Talon chain zip on the breast pocket.
Chest (pit to pit): 25-1/2″ (doubled = 51″)
Shoulder to shoulder: 19-1/2″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 24-1/4″
http://www.ebay.com/itm/271994249165
This vintage jacket was made in the 1930s by the Pendleton Woolen Mills of Portland Oregon. It bears the early style Pendleton label, used up to the early 1940s. The jacket is a mackinaw wool work style, with a distinctive combination yoke and shoulder reinforcement, rounded collar points, D-shaped handwarmer pockets, buttoned side adjuster tabs and button adjusters on the cuffs. The zipper on the jacket is a 1950s-1960s replacement, made by Talon. As is typical of these early mackinaw work jackets, this one is unlined. With a 49″ chest, this would best fit a size 44 or 46
Chest (pit to pit): 24-1/2″ (doubled = 49″)
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 26-1/2″
Length (base of collar to hem): 26″
http://www.ebay.com/itm/400926470278
This vintage jacket was made in Hartford, Wisconsin in the late 1950s-1960s by W.B. Place & Co, Deerskin Tanners, makers of Gloves and Jackets. It is made of deerskin in a classic utility jacket style. It has patch pockets, a square front and back yoke and a main Talon zipper.
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 17-1/2″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 24-1/2″
http://www.ebay.com/itm/271783149533
This vintage jacket was made in the mid-late 1940s. It is gabardine, made in a waist length utility jacket style, with a half-belt back with a center pleat, straight yoke and side adjuster buckles. The jacket has a Talon main zipper, with a square cornered slider and U shaped Talon stopbox, which was produced in the immediate post-war years. The jacket is fully lined, and does not have a label.
Chest (pit to pit): 21-1/2″ (doubled = 43″)
Shoulder to shoulder: 18-1/2″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 24-1/2″
