http://www.ebay.com/itm/281666464191
These vintage boots were made by LaCrosse in the mid-late 1930s. They are rubber overshoes, with rare pin-lock no-hole fan shaped talon zippers.
Tag Archives: clothing
Resistol Double X cowboy hat
http://www.ebay.com/itm/281693651303
This vintage hat was made by Resistol in the 1950s. It is rare to come across these early Resistol westerns, and rare to find cowboy hats like this with a bound brim. As you can see from the fade line, it originally had a mid-with ribbon, much wider than usually found on westerns of this era. It has the early Resistol Western liner (Before westerns became Resistol’s bread and butter) and a brown leather sweatband. It was originally sold by Wolf Brothers of Omaha, Nebraska. It is a size 7-1/4.
1920s Cravenette trench coat
http://www.ebay.com/itm/281687540794
This vintage coat was made in the mid to late 1920s. The jacket is wool gabardine that has been Cravenette Processed to shed showers. The process’s name became a generic name at this period for this style of coats that doubled as lightweight overcoats and as raincoats.
The “double service – for clear days for storm days” slogan of Cravenette’s was phased out by the late 1920s, helping to further narrow the dating down. The coat is a double breasted trench coat style, introduced c. 1915. The jacket has a half-belt back, with a center pleat terminating in triangular reinforcement stitching. It is partially lined.
Chest (pit to pit): 21″ (doubled = 42″)
Sleeve (center of collar to cuff): 32″
Length (Base of collar to hem): 43″

1950s Botany 500 overcoat
http://www.ebay.com/itm/271865319746
This vintage overcoat was tailored by Darhoff for Botany 500 and was sold by the Frank Clothing Company of Livingston, Montana.
Tagged size: 39 Long
Chest (pit to pit): 24-1/2″ (doubled = 49″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 26-1/2″
Length (base of collar to hem): 47″
1940s Hollywood Sportswear Hollywood jacket
http://www.ebay.com/itm/281687560671
This vintage jacket was tailored by the Hollywood Sportswear Company of Los Angeles California in the late 1940s – early 1950s. It is made of tan gabardine, with patch pockets and pick stitched collar detailing. It is fully lined.
Chest (pit to pit): 25″ (doubled = 50″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 25-3/4″
Length (base of collar to hem): 31″
1940s Palm Beach Goodall Springweave jacket
http://www.ebay.com/itm/271865336045
This vintage jacket was made by Goodall, creators of the famed Palm Beach Cloth from their Springweave fabric. Springweave was introduced in early 1944. Goodall changed their name and label to Goodall Sanford in late 1944, so this is a rare and precisely date-able piece of vintage. This was from the early formulation of Springweave fabric, which consisted of lightweight wool and mohair. It has a nice herringbone weave to the fabric, a two button cut, and patch pockets. The jacket was sold by the Stix, Baer and Fuller men’s store.
Size: 38
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 18-1/2″
Sleeve (shoulder to cuff): 24-1/2″
Length (base of collar to hem): 30-1/2″
1930s-1940s Penney’s Brown Tweed Suit
http://www.ebay.com/itm/281687585363
This vintage suit was made in the late 1930s – mid 1940s and was sold by the J.C. Penny Co., Inc. It is made of flecky brown Donegal Tweed, in a three button cut. The jacket has a purple half-lining. There is a faded union label in the pocket, unfortunately now illegible. The patns have buttons for braces, dropped narrow belt loops and a Serval zipper. They are cuffed.
Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 28-1/2″
Waist (side to side): 15″ (doubled = 30″)
Outseam: 40″
Inseam: 29″
Rise: 11″
1940s Benchly Double Breasted suit jacket
http://www.ebay.com/itm/271865357281
This vintage jacket was made by Benchly and was sold by Lowenson’s of Portland, Oregon. It is double breasted and bears a 1939 union label.
Chest (pit to pit): 22-12″ (doubled = 45″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 30″
Cushman Japan reproduction wool half-belt jacket
http://www.ebay.com/itm/281687597362
This jacket was made by high end Japanese manufacturer Cushman, inspired by a mid 1930s workwear jacket. It is made from gray and eggplant plaid wool, with a half-belt back, built in vest, handwarmer pockets, belted cuffs, breast pocket and zip front. The jacket has a Waldes main zipper with an early 1930s Talon influenced grommet stopbox. The pocket zipper has a ball and chain pull, again typical of mid 1930s jackets. The jacket is, as was typical of this style of 1930s jackets, unlined. The front panels have a sort of half-lining, from the same wool as the jacket, which folds forward into the attached vest. It has cat-eye buttons. The side adjuster belts have fancy metal buckles. The jacket has a black and yellow label reading, “Outerwear by Cushman, Smarter Styling – Longer Wear”, in addition to a keystone All Wool tag.
Chest (pit to pit): 22-1/2″ (doubled = 45″)
Sleeve (center of collar to end of cuff): 34″ (roughly equivalent to 18″ shoulders and 25″ sleeves)
Length (collar seam to hem): 25″
1930s Albert Richard Grizzly jacket
http://www.ebay.com/itm/281655706660

This vintage jacket was made in Milwaukee, Wisconsin by Fried Ostermann between 1936 and 1938 under the Albert Richard Sportswear label. The jacket is made of front quarter horsehide leather, with mouton panels and collar. Originally sold as a “Laskinlamb jacket”, this style has come to be known by collectors as the Grizzly. These were popular in the mid to late 1930. The jacket has Albert Richard’s patented Tu-Length cuffs, which have buttons on either side, allowing them to be worn down for a longer sleeve or turned up and buttoned for a shorter sleeve length. The jacket has a Talon main zipper with a grommet style stopbox. The slider is of the deco sunburst design with oval slider-to-puller connection, which was only produced in the mid 1930s and which was replaced by a simpler design around 1938. The pull is a rectangular holed, plain backed version, also typical of mid 1930s production. The jacket is lined with plaid wool, with leather pit guards and ventilation grommets. The sleeves have knit storm cuffs to keep out the wind. The collar has a buttoned chinstrap throat latch to cinch it up tight in bad weather.
Chest (pit to pit): 20″ (doubled = 40″)
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff, turned down): 26″
Sleeve (shoulder to cuff, turned up): 24″
Length (Base of collar to hem): 21-1/2″
A history of Albert Richard which I wrote for “The Art of Vintage Leather Jackets”:
Fried-Ostermann was founded c.1902 as a glove manufacturer. They bought out their competitor, Price Gloves, and relocated production of that company’s products to their original factory, located at 617-645 Reed Street, Milwaukee, WI. By 1915, the company had gained a partner, and was known as the Fried, Ostermann, Meyer Co, but that looks to only have lasted until 1917. As the company grew, they relocated to 1645 S. 2nd Street, Milwaukee, WI.
Fried-Ostermann diversified out of gloves and into outerwear in the late 1920s with the formation of a new division of the company, called Albert Richard. The leather jackets, mackinaws, overcoats and sportswear produced by Albert Richard would soon come to eclipse the glove-making side of the company.
Pre-war advertising stressed health and sports, with endorsements from college football players. These ads also talk about bringing items of clothing which were previously thought of as workwear, like mackinaws and leather jackets, into the realm of ordinary streetwear, citing their comfort and durability.
During WWII, the Albert Richard factory made A-2 (contract AC 23383), M-422A (contract 1406A), M444A and M445A flight jackets under the name of their parent company, Fried-Ostermann. They advertised leather jackets, overcoats and sportswear heavily during WWII, giving their jackets model names like the “Spitfire” and the “Meteor”. During the war, the company gave away wall-sized posters showing a range of american military airplanes.
850 workers were employed by Albert r in 1946, with plans to hire another 400. The company was one of the first to use fiberglass insulation in coats, a technology borrowed from b-29 bombers Sheepskin collared “storm coats” became a signature model after the war.
President of Fried-Ostermann, Richard Fried, sold their Albert Richard Division to the Drybak corporation of Binghampton, NY in late 1952. Drybak, a maker of canvas hunting clothing was looking to diversify their line. In the deal, they got the licensing, branding, patterns, dealership network, but other than the Vice President and designer for Albert Richard, all of the employees and equipment stayed at the plant in Milwaukee. Fried-Osterman re-focused the attention of their plant on the production of gloves, and on producing leather jackets under house labels for mail order and department stores.
Starting in 1953, under Drybak’s ownership, Albert Richard clothing was once again produced, this time under contract at a factory in New Jersey, which Drybak declined to name. The plan at that time was to have production moved to New York by 1954. Labels were changed in this period to read “Albert Richard by Drybak”. In 1955, Drybak acquired the Martin Mfg. Co. in Martin, TN. They closed their Binghamton operations in that same year and relocated their hunting clothing manufacturing and their Albert Richard division to the Tennessee plant to take advantage of the lower labor costs in the south.
























































































