1950s Zero King hudson’s bay point blanket jacket

http://www.ebay.com/itm/271738364402
This vintage jacket was made in the 1950s by Zero King Sports Apparel. It is tailored from a red and black point blanket, possibly Hudson’s Bay, but there are no mill tags on it. The jacket is single breasted, with a zipper front. The original zipper has been replaced with a vinyl YKK, which works well. The jacket has caped shoulders, similar to earlier Carss mackinaw detailing. It is partially lined.

Chest (pit to pit): 26″ (doubled = 52″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 32″

 photo editzeroking.jpg

 photo IMG_0548.jpg

 photo IMG_0549.jpg

 photo IMG_0550.jpg

 photo IMG_0551.jpg

 photo IMG_0553.jpg

1940s tweed sportcoat

http://www.ebay.com/itm/281560351633
This vintage tweed jacket was made in the 1940s. It is made of an oatmeal and brown striped tweed, similar in pattern to what was used on Fender tweed amps. It is single breasted, with three leather knot buttons, no vent, and patch pockets. The jacket is half lined and has no tags. The leather buttons may be replacements, as there is a bag with smaller matching leather cuff buttons in the pocket which have not been sewn on.

Chest (pit to pit): 20″
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24-1/2″
Length (Base of collar to hem): 29″

 photo edittweed.jpg

 photo IMG_0554.jpg

 photo IMG_0555.jpg

 photo IMG_0556.jpg

 photo IMG_0557.jpg

 photo IMG_0558.jpg

Rubin Brothers wool workwear jacket

http://www.ebay.com/itm/281560160614
This vintage workwear jacket was made by Rubin Bros. It is made of gray wool, has a serged round collar and a snap front. There is an inside pocket.

Chest (pit to pit): 29″ (doubled = 58″)
Shoulder to shoulder: 20-1/2″
Sleeve (shoulder to cuff): 27-1/2″
Length (base of collar to hem): 29-1/2″

 photo IMG_0606.jpg

 photo IMG_0608.jpg

 photo IMG_0609.jpg

 photo IMG_0610.jpg

Ralph Lauren reproduction 1920s hunting jacket

http://www.ebay.com/itm/271738109867
This hunting jacket was made by Ralph Lauren as part of their now defunct Polo Sportsman line. It is made of brown canvas and is sort of a greatest hits version of 1910s-1930s hunting jackets, drawing mainly from the detailing of Red Head and Duxbak designs. It has a front entry half-moon style game pouch, double breast pocket and double round cargo pockets. The shoulders are reinforced and there is corduroy on the collar and inside the cuffs. The sleeves have double ventilated armpit gussets, the collar has a buttoned throat latch, and the cuffs have a distinctive button closure, which, unlike the rest of the detailing of the coat, I do not recognize.

Chest (pit to pit): 25″ (doubled = 50″)
Shoulder to shoulder: 21″
Sleeve (shoulder to cuff): 24-1/2″
Length (base of collar to hem): 31″

 photo IMG_0418.jpg

 photo IMG_0419.jpg

 photo IMG_0420.jpg

 photo IMG_0421.jpg

 photo IMG_0422.jpg

 photo IMG_0423.jpg

 photo IMG_0424.jpg

 photo IMG_0425.jpg

 photo IMG_0426.jpg

 photo IMG_0427.jpg

1950s red wool American Field hunting jacket

http://www.ebay.com/itm/281560039758
This vintage hunting jacket was made in the 1950s in Toledo, Ohio by the Hettrick Manufacturing Company under their American Field Sportswear label. The jacket is made from red wool, with handwarmer pockets and buttoned, flapped cargo pockets. It has access to an internal game pocket through buttoned slits on the side seams. The coat has a cotton flannel lining and viscose rayon sleeve linings.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 31″

 photo IMG_0413.jpg

 photo IMG_0414.jpg

 photo IMG_0415.jpg

 photo IMG_0416.jpg

 photo IMG_0417.jpg

1950s Sprung Clindinin fringed deerskin leather jacket

http://www.ebay.com/itm/281560029359
This vintage leather jacket was made in the 1950s in Calgary, Alberta, Canada by Sprung Clindinin Ltd. It is made of deerskin suede with a Lightning zipper front (pull on the left tape as is the Canadian standard), half-belt back and fringe running the sleeve and yoke seams. It has side adjuster buckles.

Tagged size: 40
Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 28″

 photo IMG_0408.jpg

 photo IMG_0409.jpg

 photo IMG_0410.jpg

 photo IMG_0411.jpg

 photo IMG_0412.jpg

King-O-Wear workwear jacket

http://www.ebay.com/itm/271737229397
This vintage work jacket was made by King-O-Wear. It is a waist length style, made in black wool, with buckle adjuster sides, handwarmer pockets, a zipper front and grommet reinforcements for a badge. This style goes back to the 1930s, but this example was likely produced in the 1960s. As is consistent with earlier production examples of this style, the jacket is unlined. The 1949 union label and the Talon zipper on this helps to date this one. While the pull on the zipper goes back to the 1930s on luggage, its usage on jackets did not start until later. The stop-box is of the type which started use in the late 1950s. The union label is a half-scale variant which I have only seen used by King-O-Wear.

Tagged size: 48
Chest (pit to pit): 25-1/2″
Shoulder to shoulder: 18-1/2″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 25″

 photo editkingowear.jpg

 photo IMG_0428.jpg

 photo IMG_0429.jpg

 photo IMG_0431.jpg

 photo IMG_0434.jpg

 photo IMG_0436.jpg

 photo IMG_0438.jpg

 photo IMG_0437.jpg

 photo IMG_0435.jpg

1950s Land-N-Lakes peak lapel western jacket

http://www.ebay.com/itm/271737182147
This vintage western jacket was made in the late 1950s by the Herman K. Lavin Company of St. Paul, Minnesota under the Land-N-Lakes label. The jacket is made from a blend of Wool, Nylon and Cashmere in an attractive muted plaid. The jacket has peak lapels, and fancy western yokes front and back. It has bi-swing shoulders and saddelbag pockets.

Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24″
Length (Base of collar to hem): 30-1/2″

 photo editwestern.jpg

 photo IMG_0394.jpg

 photo IMG_0395.jpg

 photo IMG_0396.jpg

 photo IMG_0397.jpg

 photo IMG_0398.jpg

 photo IMG_0399.jpg

 photo IMG_0400.jpg

 photo IMG_0401.jpg

 photo IMG_0402.jpg

Reproduction 1940s style belted leather jacket

http://www.ebay.com/itm/271737199280
This leather jacket was made in the 1980s or so in the style of a 1940s fully belted leather surcoat. The belt buttons on and off like the originals (though most of them have lost their front sections). It has a zipper front (nylon ykk) and a bi-swing back.

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 22″
Length (base of collar to hem): 29″

 photo IMG_0403.jpg

 photo IMG_0404.jpg

 photo IMG_0405.jpg

 photo IMG_0406.jpg

1920s Drybak hunting jacket

http://www.ebay.com/itm/271727703096
This vintage jacket was made by the Drybak company of Binghamton, New York in the 1920s. It is made of canvas with a corduroy collar and cuff linings. The jacket has reinforced shoulders, a half-moon style front entry game pouch access with scalloped reinforcement stitching, a large flapped breast pocket, and handwarmer pockets which form the pocket flaps for large cargo pockets and shotgun shell pockets. It has combination sleeve panel / ventilated underarm gussets which are unique to Drybak, as well as a flip up ear warmer panel. The buttons are branded Drybak or Money Back and the jacket bears the early style red white and black Drybak tag.

Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 21-1/2″
Length (Base of collar to hem): 27″

 photo DSCF8716.jpg

 photo DSCF8725.jpg

 photo DSCF8717.jpg

 photo DSCF8719.jpg

 photo DSCF8720.jpg

 photo DSCF8721.jpg

 photo DSCF8722.jpg

 photo DSCF8723.jpg

 photo DSCF8729.jpg

 photo DSCF8726.jpg

 photo DSCF8727.jpg