Ralph Lauren wool half-belt jacket

http://www.ebay.com/itm/281644182020
This jacket was made by Ralph Lauren under the Polo label and is based closely on work jackets of the 1930s. It has a half-belt back with side adjusters, shirt style collar, buttoned cuff adjuster belts, unlined construction with tape seams, handwarmer pockets, a zipped breast pocket and vintage style buttons.

Tagged size: XL
Chest (pit to pit): 26″ (doubled = 52″)
Shoulder to shoulder: 24″
Sleeve (shoulder to cuff): 26-1/2″
Length (base of collar to hem): 27″

 photo edit ralph.jpg

 photo DSCF3828.jpg

 photo DSCF3829.jpg

 photo DSCF3831.jpg

 photo DSCF3836.jpg

 photo DSCF3837.jpg

 photo DSCF3840.jpg

1950s atomic fleck Marbury Overcoat

http://www.ebay.com/itm/281644171468
This vintage overcoat was made in the early 1950s by Marbury Coats. It has raglan shoulders, a three button front and is made from a fantastic atomic flecked / overcheck wool.
Chest (pit to pit): 24″ (doubled = 48″)
Sleeve (center of collar to end of cuff): 34-1/2′
Length (base of collar to hem): 45″

 photo edit marbury.jpg

 photo DSCF3841.jpg

 photo DSCF3842.jpg

 photo DSCF3843.jpg

 photo DSCF3844.jpg

 photo DSCF3846.jpg

 photo DSCF3848.jpg

 photo DSCF3849.jpg

1950s All Weather Garment goatskin bomber jacket

http://www.ebay.com/itm/271820684029
This vintage jacket was made in California in the early 1950s from imported Goat Skin. It was made by All Weather Garment. The jacket is made in a post-war “bomber jacket” style, which takes elements of the A-2 flight jacket and melds them with other pre-war civilian styles to make something new. The jacket has patch pockets with scalloped pocket flaps and angled corners, epaulettes, a shirt style collar, knit cuffs and waistband and a Talon zipper of the style only used in the early 1950s, with the unmarked wide rib stopbox and square hole slider. The jacket has a quilted liner. With a 54″ chest, this would best fit someone who wears a 48-50 long. These early jackets are difficult to find in these larger sizes, especially in such an excellent state of preservation.

Chest (pit to pit): 27″ (doubled = 54″)
Shoulder to shoulder: 21-1/2″
Sleeve (shoulder to end of knit): 27″
Length (base of collar to end of waistband): 26-1/2″

 photo edit allweather.jpg

 photo DSCF3811.jpg

 photo DSCF3812.jpg

 photo DSCF3813.jpg

 photo DSCF3816.jpg

 photo DSCF3817.jpg

 photo DSCF3818.jpg

1950s Penney’s Sportclad gabardine jacket

http://www.ebay.com/itm/281644153631
This vintage jacket was made in the early 1950s for Penney’s under the Sportclad label. It is made of khaki colored wool gabardine, with elastic side panels for a neat silhouette, an evolution of the half-belt and side adjuster buckes of 1930s jackets of a similar style. The jacket has a Talon zipper, with the deep grooved, unmarked U shaped stop box which was used in the early 1950s.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 24-3/8″

 photo edit sportclad.jpg

 photo DSCF3799.jpg

 photo DSCF3800.jpg

 photo DSCF3804.jpg

 photo DSCF3806.jpg

 photo DSCF3808.jpg

 photo DSCF3810.jpg

1930s-early 1940s Bond double breasted overcoat

http://www.ebay.com/itm/271820455903
This vintage overcoat was made in the 1930s-early 1940s by Bond Clothes. It is made of black herringbone wool, is double breasted, with wide peaked lapels and a breast pocket. The coat is fully lined, and bears either a 1936 or 1939 Amalgamated Clothing Workers of America Union label.

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 40″

 photo edit bond.jpg

 photo DSCF2816.jpg

 photo DSCF2817.jpg

 photo DSCF2818.jpg

 photo DSCF2820.jpg

 photo DSCF2821.jpg

 photo DSCF2822.jpg

 photo DSCF2825.jpg

 photo DSCF2827.jpg

1930s tweed overcoat

http://www.ebay.com/itm/281643938546
This vintage overcoat was made in the 1930s. It is made of a great brown and cream tweed with an orange overcheck. The coat is single breasted and half-lined with a great herringbone lining.

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 44″
 photo edit tweed.jpg

 photo DSCF2809.jpg

 photo DSCF2810.jpg

 photo DSCF2811.jpg

 photo DSCF2812.jpg

 photo DSCF2813.jpg

 photo DSCF2814.jpg

 photo DSCF2815.jpg

1950s Sears Hercules shawl collar sheeplined coat

http://www.ebay.com/itm/281636830152
This vintage coat was made in the 1950s for Sears Roebuck and Co under their Fieldmaster outerwear label. The coat is made of cotton canvas, with a 3/4 sheepskin lining, brown mouton collar, full belt and quilted sleeve linings. It has leather reinforcements at the corners of the handwarmer and flapped hip pockets, and loop closure for the buttons.

Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 19-1/2″
Sleeve (shoulder to cuff): 25-1/2″
Length (base of collar to hem): 34″

 photo edit fieldmaster.jpg

 photo DSCF3760.jpg

 photo DSCF3761.jpg

 photo DSCF3763.jpg

 photo DSCF3766.jpg

 photo DSCF3769.jpg

 photo DSCF3773.jpg

 photo DSCF3774.jpg

 photo DSCF3775.jpg

1920s red Hudson’s Bay point blanket mackinaw coat

http://www.ebay.com/itm/281636805140
This vintage coat was made in the 1920s by the Hudson’s Bay company. It is made of red HBC point blanket material, in a classic double breasted mackinaw cut. The points are located on the side seam and the black portion of the blanket has been used for contrast on the belt loops. The coat is, as was typical of mackinaws of this period, unlined. The label is a rare early variant, used up to the mid 1920s, when it was amended with registration numbers, as is seen on another, slightly later HBC mackinaw I’m currently selling. For a full rundown of the HBC labels used on these coats, please look at the chart I produced below.

Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 29″

 photo edit redhbc.jpg

 photo DSCF3776.jpg

 photo DSCF3777.jpg

 photo DSCF3778.jpg

 photo DSCF3779.jpg

 photo DSCF3780.jpg

 photo DSCF3781.jpg

 photo DSCF3786.jpg

 photo edit labelguide.jpg

1940s Maine Guide Hudson’s Bay point blanket mackinaw coat

http://www.ebay.com/itm/271813450865
This vintage coat was made in the USA by Congress under the Maine Guide Sportswear label. It is made from English-made Hudson’s Bay point blanket material, one of the highest quality and most expensive wools on the market for this type of coat at that point. These coats were most popular in red and black stripe, and in multi-stripe (green red, yellow and indigo stripes on a white background).

The style of the Hudson’s Bay label and the (R) symbol on the Maine Guide label help to date this to the late 1940s, although the overall pattern of the coat belongs more to the 1930s. There were two major waves of Hudson’s Bay Point Blanket mackinaw popularity, one in the mid 1930s and one immediately after WWII. The ones from the 1940s period to which this one belongs were generally beltless and single breasted, whereas this fits the traditional mackinaw mold of the 1920s and 1930s, but with a bit more flair. I like the way the Maine Guide coats use the pattern of the blanket to accentuate the details of their coats. The “points” of the blanket are right up front. The sleeves are defined by the stripe, as are the handwarmer pockets and the buttoned sleeve adjuster belts. The hip pocket flaps contrast against the main stripe. Some manufacturers of point blanket coats merely tailored their standard mackinaw pattern in a different material. Maine Guide went the extra step to take full advantage of everything the iconic Canadian fabric had to offer. The blanket wool is thick and has a long nap, which is also more typical of earlier production blankets than those found on coats dating from the 1950s-present, after manufacturing was switched from England to Canada. It makes sense, as the company had a lot of experience with blanket coats. In the early 1930s, Maine Guide produced a model with a double breasted chest and a zippered bottom. A really unique look.

This coat is double breasted and belted, and has stylish peak lapels and a rounded collar which I have only seen on blanket coats made by Maine Guide. Another unique feature to Maine Guide is the bottom hem, which uses the edge of the blanket, instead of having a bottom seam. The coat is unlined, which is more typical of pre-war patterns.

Chest (pit to pit): 23″
(doubled = 46″) Shoulder to shoulder: 20-1/2″
Sleeve (shoulder to cuff): 25-1/4″
Length (base of collar to hem): 35″

 photo edit maineguide.jpg

 photo DSCF3787.jpg

 photo DSCF3788.jpg

 photo DSCF3789.jpg

 photo DSCF3793.jpg

 photo DSCF3796.jpg

 photo DSCF3797.jpg

 photo DSCF3798.jpg

A progression of Hudson’s Bay labels.  This one is a variant of one used from the mid 1930s-1950s

 photo edit labelguide.jpg

1930s Great Western brown belt-back overcoat

http://www.ebay.com/itm/271811754007
This vintage overcoat was made in the 1930s by the Great Western Tailoring Company of Chicago, Illinois – The Pioneer Line. It is made of brown wool, with a double breasted cut, horizontal peak lapels, a breast pocket and belted back. The coat is half-lined, as was typical of overcoats of this era. heavy moth holes to hem. Moth bite by left pocket. Stain on left sleeve

Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 26-1/2″
Length (Base of collar to hem): 43″

 photo edit great western.jpg

 photo DSCF2796.jpg

 photo DSCF2798.jpg

 photo DSCF2799.jpg

 photo DSCF2800.jpg

 photo DSCF2801.jpg

 photo DSCF2802.jpg

 photo DSCF2806.jpg