Tag Archives: Fieldmaster
Early’s Witney Point blanket coat
This vintage coat was made in Canada in the 1950s from English made Early’s Witney Point Blanket material and was sold by Sears under their Hercules Fieldmaster label. It has a Milium lining, which, when combined with the incredibly thick blankets used in this make for one of the warmest vintage coats out there.
1950s D-Pocket leather jacket biker cut
This vintage leather jacket was made in the 1950s, and was likely sold by Sears under the Fieldmaster label. This is distinguished as one of the earlier production Sears D-pockets by the small Talon zipper (before they switched to either larger Talons or Serval zips). This has a separate square bottomed patch pocket cigarette pocket, which was replaced by the late 1950s-early 1960s by a internal pocket with just the flap. The D-pocket is also a separate piece of leather, while on later manufactured versions (with either the Oakbrook or Leather Shop labels) the pocket was accomplished with stitching and a welt. This also has a tunneled belt loop through the kidney panel rather than the attached quarter belts of later versions. The earliest Sears branded D-Pockets were produced under contract by Buco in Detroit, Michigan, while later 1950s versions were produced in California. At some point, this jacket was used by a member of a biker gang, as evidenced by stitch marks left by the removal of a club insignia and top and bottom rockers. The Harley Davidson patch, which would have been added by the jacket’s owner, and which would not have been the property of the club, is still on the jacket’s kidney panel. With a chest measurement of 46″, this would fit a 42 if worn over a shirt, or roughly a 38-40 if worn over a denim jacket
Chest (pit to pit): 23″ (doubled = 46″)
Waist (side to side): 18-1/2″ (doubled = 37″)
Shoulder to shoulder:19″
Length (base of collar to hem): 21″
1950s Sears Hercules shawl collar sheeplined coat
This vintage coat was made in the 1950s for Sears Roebuck and Co under their Fieldmaster outerwear label. The coat is made of cotton canvas, with a 3/4 sheepskin lining, brown mouton collar, full belt and quilted sleeve linings. It has leather reinforcements at the corners of the handwarmer and flapped hip pockets, and loop closure for the buttons.
Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 19-1/2″
Sleeve (shoulder to cuff): 25-1/2″
Length (base of collar to hem): 34″
1920s Fieldmaster half moon hunting vest
This vintage vest was made in the late 1920s. It was sold by Sears under the Fieldmaster Gun Coats label. This label design is the early version used by Sears during this period. In the 1930s, these were mostly sold under the Double Duty label, and had slightly different detailing. The vest (or sleeveless coat as period ads always refer to these as) has an interior game pocket with a belt adjuster. The half moon pocket gives front access to this pocket. The shoulders are reinforced and the vest has two large wraparound bellows pockets.
Chest (pit to pit): 25″ (doubled = 50″)
Length (collar to hem): 24″
Sears Oakbrook D-Pocket leather motorcycle jacket
This vintage leather jacket was made in the 1960s by Sears under the Oakbrook Sportswear tag. This style was around for a while, with very little change made other than the label and zippers. 1950s models made under the Sears Fieldmaster label. It is made of black steerhide. It has a large D-Pocket (also known as a pistol pocket), with a smaller cigarette pocket. The other side has a zippered handwarmer. The lapels have exposed snaps, while the collar has concealed ones. The sleeves zip with Serval zippers, while the main is a large gauge Talon. There is a zipper on the collar, presumably for a zip-on mouton collar. The front of the jacket has an attached belt. It has a yoked back, bi-swing shoulders, and spotwork on the kidney panel. Pocket flaps are lined with black corduroy. The coat has a quilted red lining, with black corduroy trim on the pockets and the hem.
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to Shoulder: 19″
Sleeve (shoulder to cuff): 24-1/2″