Cafe Racer vest

http://www.ebay.com/itm/401007269832
This vintage jacket was made in the 1970s, in a classic band collar two pocket cafe racer style. It has a two snap collar, with a two-way female snap that can snap the extension tab back when not in use. It has a wind flap, Serval zipper and bi-swing shoulders. At some point, the sleeves were removed, likely due to some kind of damage, along with the lining.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 19″
Length (base of collar to hem): 24-1/2″

 photo edit cafe racer.jpg

 photo DSCF0432.jpg

 photo DSCF0433.jpg

 photo DSCF0434.jpg

 photo DSCF0435.jpg

 photo DSCF0436.jpg

1950s Harley Davidson Cycle Champ D-Pocket leather motorcycle jacket

http://www.ebay.com/itm/400994652332
This vintage jacket was made in the 1950s and was sold by Harley Davidson Motor Cycles. It is made of genuine Front Quarter Steerhide leather. The jacket has an asymmetrical motorcycle jacket cut, with a D pocket, zipped breast pocket, zipped side pockets, open zip cuffs and epaulettes. The ends of all the pockets are trimmed and reinforced with four nickel studs. That is doubled on the epaulettes. The jacket has a quilted lining, and Serval zippers throughout. It bears a 1949 Amalgamated Clothing Workers of America union label of the variant used from 1949-1962. The jacket is a dark seal brown.

Tagged size: 40
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 22″

 photo edit harley.jpg

 photo DSCF9500.jpg

 photo DSCF9501.jpg

 photo DSCF9502.jpg

 photo DSCF9503.jpg

 photo DSCF9512.jpg

 photo DSCF9510.jpg

 photo DSCF9504.jpg

 photo DSCF9505.jpg

 photo DSCF9506.jpg

 photo DSCF9507.jpg

 photo DSCF9508.jpg

 photo DSCF9511.jpg

 photo DSCF9513.jpg

Vanson Leathers bones chaps

http://www.ebay.com/itm/400992609457
These chaps were made by Vanson Leathers of Boston, MA. They are made of heavyweight cowhide with stitched leather bones. They have single piece legs with full length zippers, a seven snap front, and an adjustable lace up back. Vanson sizes their chaps by thigh size, these are tagged a 23″ thigh.

Minimum waist (side to side): 17″, doubled = 34″. Remember that this measurement should be taken overtop your pants, and that with the lace up back, these can adjust as large as needed.
Outseam: 41″

 photo edit chaps.jpg

 photo DSCF9240.jpg

 photo DSCF9241.jpg

 photo DSCF9242.jpg

 photo DSCF9244.jpg

 photo DSCF9245.jpg

 photo DSCF9246.jpg

 photo edit vanson 1.jpg

Hettrick Mfg. Co. Gun Coat hunting jacket

http://www.ebay.com/itm/400992493897
This vintage jacket was made in the late 1920s-early 1930s by the Hettrick Manufacturing Company of Toledo, Ohio under their American Field Gun Coats label. It is made of canvas, with a corduroy collar and cuff linings. It has leather trimmed handwarmer pockets, large cargo pockets and flapped shell pockets. It has a roomy internal game pouch with side access and gusseted underarms.

Chest (pit to pit): 27″ (doubled = 54″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 29″

 photo edit hettrick.jpg

 photo DSCF8918.jpg

 photo DSCF8920.jpg

 photo DSCF8921.jpg

 photo DSCF8922.jpg

 photo DSCF8923.jpg

 photo DSCF8924.jpg

 photo DSCF8925.jpg

 photo DSCF8927.jpg

Vintage Glover Sportswear leather jacket

http://www.ebay.com/itm/401000698266
This vintage leather jacket was made in the early 1940s by the H.B. Glover Company of Dubuque, IA. It is a classic utility jacket style, with some very nice detailing.It has a half-belt back. On the front there are flapped pockets. The jacket bears the early style “Tailored by Glover” label. The original zipper has been replaced with a large size post-war Talon

Chest (pit to pit): 22″
Shoulder to Shoulder: 18″
Sleeve (shoulder to cuff): 24″
Length (bottom of collar to hem): 28″

The H.B. Glover Company was founded in Dubuque, Iowa in 1857. They grew rapidly from the 1870s through to the turn of the century. Early on, the company was known for their Pajamas, but they quickly added shirts, overalls, and other items of workwear to their product line. By 1913, Glover was one of the top selling overall brands.
By the 1920s, Glover introduced leather jackets. Depending on the jacket ads and labels read “Tailored By Glover”, “H.B. Glover”, or “Glover Sportswear”. Glover had an endorsement deal in 1925 with the “Four Horsemen” of the Notre Dame football team, who sported their leather blouses (jackets).
According to the 1936 article “World of Romance Behind Glover Company Products”, Glover took great pride in their materials. “Most of the raw materials used in Glover Sportswear (Jackets, Coats, Ski Pants, Snow Suits, etc.) originate in the West and the Glover company in selling its goods is emphasizing this very fact. Wool from Wisconsin, Montana, the Dakotas; Mohair from Del Rio and San Angelo; Sheel leather, Horsehide, Piggrain, etc., from the great plains . . . all these find their way into Glover Sportswear. And yet not all grades of woolens and leathers are good enough for Glover garments. The selected Western Range Woolens, for example, are chosen with infinite care. The choicest portion is bought right on the range, direct from the sheep raiser, thereby eliminating costly brokerage fees and the handling of the wool in dirty, crowded warehouses.”

 photo edit glover.jpg

 photo DSCF9776.jpg

 photo DSCF9777.jpg

 photo DSCF9778.jpg

 photo DSCF9781.jpg

1950s-1960s Brent Half-belt

http://www.ebay.com/itm/271973168257
This vintage leather jacket was made for Montgomery Ward in the late 1950s- early 1960s and sold under their Brent label. It is made of leather, with a half-belt back, a surcoat length, Conmar Conmatic main zipper, zippered breast pocket and combination handwarmer/cargo pockets. It has a full quilted lining.

Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 19-1/2″
Sleeve (shoulder to cuff): 24-3/4″
Length (base of collar to hem): 28″

 photo edit brent.jpg

 photo DSCF8934.jpg

 photo DSCF8935.jpg

 photo DSCF8937.jpg

 photo DSCF8938.jpg

 photo DSCF8939.jpg

1960s Harley Davidson leather pants

http://www.ebay.com/itm/271967398697
These vintage pants were made in the 1960s for Harley-Davidson. They are made of heavyweight black leather with an absolutely killer grain. They have a double snap waistband, heavy jacket size Conmar zipper fly and diamond pull zipper pockets.

Waist (side to side): 19″ (doubled = 38″)
Outseam: 47-1/2″
Inseam: 35″
Rise: 12-1/2″

 photo edit harley pants.jpg

 photo DSCF7358.jpg

 photo DSCF7355.jpg

 photo DSCF7353.jpg

 photo DSCF7351.jpg

 photo DSCF7349.jpg

 photo DSCF7348.jpg

 photo DSCF7347.jpg

1950s Buco J-24 horsehide leather motorcycle jacket

http://www.ebay.com/itm/271935645735
This vintage jacket was made in the early 1950s in Detroit, Michigan by the Joseph Buegeleisen Company (Buco) out of horsehide. It is their J-24 D-Pocket model motorcycle jacket. From the style of stop box on the main zipper, with its wide ribs, but without the Talon name, this one was made between about 1952 and 1957. The jacket has a D-pocket map pocket with a rounded cornered cigarette pocket. It has zipped sleeves, snapped lapels, snapped belt loops for an external belt, bars on the epaulettes, zippered side storage, a handwarmer pocket, and bi-swing shoulders. At some point, it appears the original owner either broke the main zipper or gained weight, and added snaps, which are offset from the original zip position.

Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 23-1/2″

 photo edit buco.jpg

 photo DSCF7960.jpg

 photo DSCF7961.jpg

 photo DSCF7963.jpg

 photo DSCF7964.jpg

 photo DSCF7965.jpg

 photo DSCF7967.jpg

 photo DSCF7968.jpg

 photo DSCF7969.jpg

 photo DSCF7971.jpg

 photo DSCF7972.jpg

 photo DSCF7973.jpg

 photo DSCF7975.jpg

 photo DSCF7976.jpg

 photo DSCF7977.jpg

 photo DSCF7978.jpg

 photo DSCF7980.jpg

 photo DSCF7981.jpg

 photo Buco Ad.jpg

Early 1930s cut down Cossack Jacket

http://www.ebay.com/itm/271934443374
This vintage jacket was made in the early 1930s, probably between about 1930 and 1934. This style, with the plain back, side panels with buckle adjusters, leather waistband and small patch pockets, was one of the first jacket styles to become popular following the invention of the separable bottomed zipper in 1930. The jacket has a buttoned throat latch / chinstrap, and while the zipper is a 1950s Conmar, replacing what would likely have been a double branded Hookless/Talon, the grommets from the original zip are still in place at the waistband.

Chest (pit to pit): 18″ (doubled = 36″)
Shoulder to shoulder: 15″
Length (base of collar to hem): 23-1/2″

 photo edit 1930s jacket_1.jpg

 photo DSCF7858.jpg

 photo DSCF7859.jpg

 photo DSCF7860.jpg

 photo DSCF7862.jpg

 photo DSCF7863.jpg

 photo 32101_B017984-00432.jpg