Brown and Camel Hudson’s Bay point blanket coat

http://www.ebay.com/itm/271378596257
This vintage mackinaw coat was made by the Hudson’s Bay Company in the 1940s from their iconic point blankets. This is a particularly rare model, made in a tan point blanket, instead of the more typical red and black or multi-stripe. It has the classic mackinaw cut: double breasted, belted, with patch pockets on the hips and handwarmers on the chest. The lining of the coat is a transitional style, which helps date it. Generally, mackinaw coats like this made in the 1920s and 1930s were completely unlined. In the 1940s, half linings like this one has started to come into fashion. By the 1950s, most were fully lined. The original owner’s name. “G. Lasker” is written in the lining.

Chest (pit to pit): 22″
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25-3/4″
Length: 34″

 photo IMG_7521.jpg

 photo IMG_7522.jpg

 photo IMG_7524.jpg

 photo IMG_7527.jpg

 photo IMG_7528.jpg

 photo IMG_7529.jpg

 photo IMG_7530.jpg

 photo IMG_7531.jpg

c.1946 half-belt leather jacket

http://www.ebay.com/itm/281248820993
This vintage leather jacket was made immediately post-war, around 1946 or 1947. It feels like horsehide, but without a label to confirm, it’s possible that it’s steer. It has square yoked shoulders, handwarmer pockets on the chest, and flapped pockets on the hips. The back has a half-belt and pleats. The zipper is a Talon of the type used just after the war, with a pre-war style “small hole” pull tab and a U-shaped stop box stamped with the Talon name. The makers tag is long gone, but the original owner’s name, John Meinel, has been sewn into the lining by the collar.

Chest (pit to pit): 22″
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 27″

 photo IMG_1271.jpg

 photo IMG_1272.jpg

 photo IMG_1275.jpg

 photo IMG_1276.jpg

 photo IMG_1277.jpg

 photo IMG_1278.jpg

 photo IMG_1279.jpg

 photo IMG_1282.jpg

 photo IMG_1283.jpg

 photo IMG_1285.jpg

Canadian army Mackinaw

http://www.ebay.com/itm/271371781839

This vintage mackinaw was made in 1952 for the Canadian army. Stylistically, it is almost identical to civilian Sheeplined mackinaws of the 1920s-1940s. It is, however, made of tougher stuff than most civilian (or US army) mackinaws of this style. The canvas shell is extremely heavy and rugged. The waist belt is much wider than is typical, and is has keeper loops to secure it to the belt loops so that it is not lost, as so often happens. The coat is fully lined in blue green pile, which is less fragile than the sheepskin linings in these can be this many years on. The sleeves are also lined in this material, and have extra long storm cuffs. The coat was made by the Scott Leather Goods Co. of Montreal, and is tagged a size 40.

Tagged size: 40
Chest (pit to pit): 25″ (doubled = 50″)
Shoulder to shoulder: 21″
Sleeve (shoulder to cuff):25-1/2″
Length: 36″

 photo IMG_1193.jpg

 photo IMG_1194.jpg

 photo IMG_1195.jpg

 photo IMG_1197.jpg

 photo IMG_1199.jpg

 photo IMG_1200.jpg

 photo IMG_1201.jpg

 photo IMG_1202.jpg

M1938 Jeep Coat

http://www.ebay.com/itm/271370848434
This vintage coat is an m1938 jeep coat, issued during WWII. The style descends from sheeplined canvas work coats and shawl collared mackinaws of the 1910s-1930s. It has a cotton shell and a wool lining. The coat has a double breasted front and a wide wool faced shawl collar. It is belted. There is a buttoned throat latch under the collar to secure it in cold weather, fastened with a riveted “wreath” button. Patches identify the original owner as a technical sergeant in the Army Service Forces.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25-1/2″
Length: 31-1/2″

 photo IMG_1143.jpg

 photo IMG_1144.jpg

 photo IMG_1145.jpg

 photo IMG_1147.jpg

 photo IMG_1148.jpg

 photo IMG_1149.jpg

 photo IMG_1150.jpg

 photo IMG_1151.jpg

WWII Doeskin Army Mackinaw

http://www.ebay.com/itm/271371265923
This vintage army mackinaw was made in 1942. It is made of doeskin wool in a double breasted, shawl collared, belted mackinaw style. The spec tag identifies the official name as the Officer’s Short Overcoat, and the size as a 38 Long. One of the buttons on the belt is missing, but replacements for this model coat are easily found.

Chest (pit to pit): 21-1/2″
Shoulder to shoulder: 19-1/2″
Sleeve (shoulder to cuff): 25″
Length: 34″

 photo IMG_1164.jpg

 photo IMG_1165.jpg

 photo IMG_1166.jpg

 photo IMG_1167.jpg

 photo IMG_1168.jpg

 photo IMG_1169.jpg

 photo IMG_1170.jpg

1940s Zero King Hollywood Jacket

http://www.ebay.com/itm/271370802233
This vintage Hollywood jacket was made in the 1940s by Zero-King. It has a wool gabardine body, and suede leather trim with fringe. It has button adjusters on the sides, and leather cuffs.

Chest (pit to pit): 23″
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length: 28″

 photo IMG_1112.jpg

 photo IMG_1113.jpg

 photo IMG_1114.jpg

 photo IMG_1117.jpg

 photo IMG_1118.jpg

 photo IMG_1119.jpg

 photo IMG_1120.jpg

 photo IMG_1121.jpg

 photo IMG_1122.jpg

1950s Hudson’s Bay car coat

http://www.ebay.com/itm/281243854821
This vintage coat was made in the 1950s. It is a Hudson’s Bay point blanket style, though this particular pattern of blanket came from a different woolen mill. This single breasted car coat style was made in this blanket material during the 1950s by a variety of makers. I’ve had ones very similar to this made by Lakeland and by Albert Richard. Unfortunately, this one has lost its tags, and the details, while close to the others, are not exact, so I can not be certain on the manufacturer. It has knotted leather buttons, and belted cuffs with a very nice loop detail. The coat has a quilted lining.

Chest (pit to pit): 23-1/2″ (doubled = 47″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25-1/2″
Length: 33-1/2″

 photo IMG_1083.jpg

 photo IMG_1084.jpg

 photo IMG_1085.jpg

 photo IMG_1086.jpg

 photo IMG_1087.jpg

 photo IMG_1088.jpg

 photo IMG_1089.jpg

Jeffrey Banks / Lakeland blanket coat

 

This coat was made in the late 1970s by Lakeland, and was designed by Jeffrey Banks, in the early days of his career.  It is a classic double breasted peacoat/mackinaw style, made in red and black striped blanket material. The coat draws heavy influence from earlier decades and Lakeland products, like the 1947 “Jackinac”. The silhouette and material are straight out of the 1930s or 1940s, but updated with more modern luxuries like a quilted liner. The Lakeland x Jeffrey Banks line of the late 1970s and early 1980s was made up of these reproduction pieces, in the same way the current Ralph Lauren RRL line is today.  Another can be seen here: https://vintagehaberdashers.com/2013/12/16/jeffrey-banks-lakeland-shawl-collar-mackinaw/

 photo IMG_0440.jpg
 photo IMG_0441.jpg
 photo IMG_0443.jpg
 photo IMG_0445.jpg
 photo IMG_0447.jpg
 photo IMG_0449.jpg
 photo IMG_0450.jpg

Western Costume shawl collar jacket

http://www.ebay.com/itm/281231689469
This vintage jacket came from the warehouses of Western Costume of Hollywood, and was used in Westerns and in 19th century period pieces. With the texture of the fabric and the placement of the pockets, I would guess that this was probably cut down from an old shawl collared overcoat or mackinaw, and had the collar trim and extra buttonholes added by Western Costume. The jacket has fairly heavy wear, which is to be expected from something that’s been in a movie costume department for decades.

Chest (pit to pit): 21″
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length: 20″

 photo IMG_0159.jpg

 photo IMG_0160.jpg

 photo IMG_0161.jpg

 photo IMG_0162.jpg

 photo IMG_0163.jpg

 photo IMG_0164.jpg

 photo IMG_0165.jpg

Mid 1940s Albert Richard leather jacket

http://www.ebay.com/itm/271352480738
This vintage leather jacket was made by Albert Richard in the mid 1940s. It is made of “Chevro-Kid” goatskin. This trade name was typical of Albert Richards’s naming schemes during WWII and shortly after, playing of military terminology. The company could back this up- they produced flight jackets for the army and navy during the war. This jacket is made of the same goatskin used for these Navy flight jacket contracts. The jacket is a hip length style, with flapped saddlebag patch pockets , a straight yoke on the front, and a plain back. It was originally belted, but as with many jackets of this style, the belt is long since missing. The zipper is a Talon, with a mid 1940s stopbox and a slightly earlier style slider (these combinations were common at this period). The zipper is attached in the “surcoat” style, , where the end of the zip is attached to a triangle of leather which is free from the front of the jacket.

Chest (pit to pit): 21-1/2″ (doubled = 43″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length: 29-1/2″

A bit about Albert Richard, from an article I wrote for “The Art of Vintage Leather Jackets”.
Fried-Ostermann was founded c.1902 as a glove manufacturer. They bought out their competitor, Price Gloves, and relocated production of that company’s products to their original factory, located at 617-645 Reed Street, Milwaukee, WI. By 1915, the company had gained a partner, and was known as the Fried, Ostermann, Meyer Co, but that looks to only have lasted until 1917. As the company grew, they relocated to 1645 S. 2nd Street, Milwaukee, WI. Fried-Ostermann diversified out of gloves and into outerwear in the late 1920s with the formation of a new division of the company, called Albert Richard. The leather jackets, mackinaws, overcoats and sportswear produced by Albert Richard would soon come to eclipse the glove-making side of the company. Pre-war advertising stressed health and sports, with endorsements from college football players. These ads also talk about bringing items of clothing which were previously thought of as workwear, like mackinaws and leather jackets, into the realm of ordinary streetwear, citing their comfort and durability.
During WWII, the Albert Richard factory made A-2 (contract AC 23383), M-422A (contract 1406A), M444A and M445A flight jackets under the name of their parent company, Fried-Ostermann. They advertised leather jackets, overcoats and sportswear heavily during WWII, giving their jackets model names like the “Spitfire” and the “Meteor”. During the war, the company gave away wall-sized posters showing a range of american military airplanes. 850 workers were employed by Albert r in 1946, with plans to hire another 400. The company was one of the first to use fiberglass insulation in coats, a technology borrowed from b-29 bombers. Sheepskin collared “storm coats” became a signature model after the war.
President of Fried-Ostermann, Richard Fried, sold their Albert Richard Division to the Drybak corporation of Binghampton, NY in late 1952. Drybak, a maker of canvas hunting clothing was looking to diversify their line. In the deal, they got the licensing, branding, patterns, dealership network, but other than the Vice President and designer for Albert Richard, all of the employees and equipment stayed at the plant in Milwaukee. Fried-Osterman re-focused the attention of their plant on the production of gloves, and on producing leather jackets under house labels for mail order and department stores.
Starting in 1953, under Drybak’s ownership, Albert Richard clothing was once again produced, this time under contract at a factory in New Jersey, which Drybak declined to name. The plan at that time was to have production moved to New York by 1954. Labels were changed in this period to read “Albert Richard by Drybak”. In 1955, Drybak acquired the Martin Mfg. Co. in Martin, TN. They closed their Binghamton operations in that same year and relocated their hunting clothing manufacturing and their Albert Richard division to the Tennessee plant to take advantage of the lower labor costs in the south. Production was low, and this new plant closed almost as soon as it opened.

 photo IMG_0087.jpg

 photo IMG_0088.jpg

 photo IMG_0089.jpg

 photo IMG_0092.jpg

 photo IMG_0093.jpg

 photo IMG_0094.jpg

 photo IMG_0095.jpg

 photo IMG_0096.jpg

 photo IMG_0097.jpg