1920s point blanket Carss Mackinaw coat

http://www.ebay.com/itm/281318812696
This vintage mackinaw coat was made in Orillia, Ontario in the 1920s or 1930s by the Carss Mackinaw company. It is made of striped point blanket material, with four patch pockets and a belted back. It has a squared off shawl collar, and caped shoulders, both distinctively Carss details. The coat is unlined, as is typical of mackinaws of this era.

Chest (pit to pit): 25″ (doubled = 50″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length: 30-1/2″

A bit about the company, from a history piece I wrote for “The Fedora Lounge”: Carss Mackinaw made blanket coats in Orillia, Ontario from at least 1897. Their signature model was single breasted with caped shoulders and a squared-off shawl collar. They are most commonly seen in red, green, and khaki, all with a blanket stripe at the base. The fabric used in these coats was advertised as a whopping 44oz (although this one feels lighter), and was sourced from a variety of trade blanket manufacturers, including Hudson’s Bay and the Bird Woolen Mills. They were advertised as “The Only Genuine Mackinaw Made In Canada”. They were retailed by the Hudson’s Bay Company, as well as other stores.

 photo IMG_0083.jpg

 photo IMG_0085.jpg

 photo IMG_0087.jpg

 photo IMG_0088.jpg

 photo IMG_0090.jpg

 photo IMG_0093.jpg

 photo IMG_0092.jpg

 photo IMG_0086.jpg

1960s Sears D-Pocket motorcycle jacket

http://www.ebay.com/itm/281318786990
This vintage D-Pocket leather motorcycle jacket was sold by Sears in the late 1960s-early 1970s. Sears introduced their D-Pocket motorcycle jacket model in the late 1940s. A simplified version, made of Steerhide instead of the Horsehide of the original came along in 1953. The model continued to be produced into the early 1970s with few changes. Although all sold by Sears, these were sold under a variety of Sears house brand labels, including Allstate, Sears Outerwear, Sears Fieldmaster, Oakbrook Sportswear and several versions of The Leather Shop label. The label, the hardware, and subtleties of the design help pin down the date of manufacture.

The jacket is made from black steerhide, with a D-Pocket (originally known as a map pocket and also known as a pistol pocket). The pocket on these 1960s models continue to the side seam. There is a smaller flapped cigarette pocket, and a zipper handwarmer/ slash cargo pocket on the other side. The jacket has a red nylon lining, Serval zippers, epaulettes, and a zipper at the collar for a detachable mouton collar. In a tradition dating back to the days of cowboys, and passed down through generations of bikers, the back of the jacket and the epaulettes have been embellished with stud work, in three sizes of studs.

Tagged size: 42
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 23-1/2″

 photo IMG_0045.jpg

 photo IMG_0046.jpg

 photo IMG_0047.jpg

 photo IMG_0049.jpg

 photo IMG_0050.jpg

 photo IMG_0053.jpg

 photo IMG_0054.jpg

 photo IMG_0055.jpg

 photo IMG_0057.jpg

 photo IMG_0058.jpg

 photo IMG_0060.jpg

 photo IMG_0061.jpg

 photo IMG_0063.jpg

 photo IMG_0064.jpg

 photo IMG_0066.jpg

 photo IMG_0067.jpg

 photo IMG_0068.jpg

1949

 photo 1949.jpg

1958

 photo 1958.jpg

1968

 photo 1968.jpg

1972

 photo 1972.jpg

Ralph Lauren Deck Jacket

http://www.ebay.com/itm/271449035189
This jacket was made by Ralph Lauren under the Polo label. Its design is heavily influenced by early pattern USN N-1 deck jackets. It blends the styling of the button and the hook front ones. It is made from 100% cotton, in a soft knit. The jacket has a bell shaped Talon zipper, knit collar, cuffs and waistband. It has semicircular patch pockets, ventilation grommets at the underarms, a fly front and a buttoned throat latch / chinstrap.

Tagged Size: L
Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 19-1/2″
Sleeve (shoulder to end of cuff): 25″
Length (base of collar to end of waistband): 27″

 photo IMG_0393.jpg

 photo IMG_0395.jpg

 photo IMG_0396.jpg

 photo IMG_0397.jpg

 photo IMG_0400.jpg

1940s hunting coat

http://www.ebay.com/itm/271449021284
This vintage hunting coat is made from brown canvas, with a brown corduroy collar. It has large cargo pockets with shotgun shell loops inside, reinforced shoulders and an internal buttoned game pouch. It is half-lined with plaid flannel.

Chest (pit to pit): 26″ (doubled = 52″)
Shoulder to shoulder: 21″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 26″

 photo IMG_0401.jpg

 photo IMG_0403.jpg

 photo IMG_0408.jpg

 photo IMG_0409.jpg

 photo IMG_0410.jpg

 photo IMG_0404.jpg

 photo IMG_0405.jpg

 photo IMG_0407.jpg

 photo IMG_0413.jpg

 photo IMG_0412.jpg

1960s Suede Trucker Jacket

http://www.ebay.com/itm/281298801105
This vintage suede leather jacket was made in the 1960s or 1970s. It is made in a two pocket trucker style- the leather version of a classic denim jacket. It is snap front and unlined.

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23-1/2″
Length (base of collar to hem): 23″

 photo IMG_0282.jpg

 photo IMG_0283.jpg

 photo IMG_0284.jpg

 photo IMG_0285.jpg

 photo IMG_0287.jpg

 photo IMG_0288.jpg

1952 Swartz Harris Tweed jacket

http://www.ebay.com/itm/271440224781
This vintage tweed jacket was made in 1952 by T.I Swartz & Sons, Inc. of Baltimore, Maryland for A.A. Marsteller. It is made from brown herringbone Harris Tweed, and bears the 1949 label design. It has a 1949 union label.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 31″

 photo IMG_0081.jpg

 photo IMG_0082.jpg

 photo IMG_0083.jpg

 photo IMG_0084.jpg

 photo IMG_0085.jpg

 photo IMG_0086.jpg

 photo IMG_0087.jpg

 photo IMG_0088-1.jpg

 photo IMG_0089-1.jpg

1930s Black Bear Rain-Tite canvas suit

http://www.ebay.com/itm/271435185224
This vintage suit was made in the 1930s in Seattle, Washington by high end workwear and outdoor-garment manufacturer Black Bear Brand as part of their “Rain-Tite” water repellent clothes range. Black Bear Brand produced work shirts, pants, overalls, jackets and mackinaws from their plant on Rainier Ave. S. This suit is made from army duck canvas, the jacket from 10oz duck and the pants from 8 oz duck. It appears they both started out life a medium brown canvas, but years of wear and layers of waterproofing have darkened it. Both are extremely heavy duty, and are physically heavy and stiff, both from the material and from the wax proofing. The back of the jacket is two layers of the 10 oz canvas through the body, with three layers on the shoulders. The sleeves are two layers. It is constructed with overlapping capes and layers to keep everything dry in harsh weather. The pants are two layers as well. They are cut to be worn with tall boots. They have suspender buttons and belt loops. There is a crotch gusset, and a patch watch pocket inside the side pocket.

In the pocket of the pants, I found the package of a trolling spoon and an Elks matchbook advertising war bonds. This suit probably hasn’t been worn in a good 70 years or so if those are still in-tact in the pocket. The snaps are all branded “Union Made” as are all the buttons. There are union tags from the United Garment Workers of America inside the jacket and inside the flap of the back pocket of the pants. The waterproofing is still good- water beads up and falls right off. This type of suit was frequently worn by lumbermen in the North West. The heavy wear supports this. Going by the matchbook, the original owner of this one was probably from Vancouver.

Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder (under cape): 22″
Sleeve (Shoulder to cuff): 20″
Length (base of collar to hem): 28-1/2″

Waist: 17″ (doubled = 34″)
Inseam: 25″
Outseam: 38″
Rise: 13″

 photo IMG_0191.jpg

 photo IMG_0256.jpg

 photo IMG_0257.jpg

 photo IMG_0258.jpg

 photo IMG_0259.jpg

 photo IMG_0260.jpg

 photo IMG_0192-Copy.jpg

 photo IMG_0197.jpg

 photo IMG_0196-Copy.jpg

 photo IMG_0201-Copy.jpg

 photo IMG_0204.jpg

 photo IMG_0236.jpg

 photo IMG_0238.jpg

 photo IMG_0241.jpg

 photo IMG_0245.jpg

 photo IMG_0247.jpg

 photo IMG_0249.jpg

 photo IMG_0252.jpg

 photo IMG_0254.jpg

 photo IMG_0255.jpg

 photo blackbear.jpg

A similar suit in the 1920s in Alaska.  Photo from my collection  photo 102.jpg

Jay Bar Are halfbelt

http://www.ebay.com/itm/281287612435
This vintage jacket was made by Jay-Bar-Are brand. It is made of wool gabardine in a half-belt style.Despite the western brand name, the style itself is essentially a fabric version of the horsehide leather jackets of the 1930s and 1940s. The back is belted, with a center pleat. The pleat has an arrowhead reinforcement stitching detail at its top. There are side adjuster belts with D-rings. The front has handwarmer pockets and a zipped breast pocket. The zippers are all rare Waldes brand, they style produced in the late 1930s and early 1940s.

Staining to lining. Missing second buttons on cuffs. Male zipper tape missing prong and should probably be replaced. Moth bites and wear, concentrated under left arm and on front of jacket by the zipper. See photos

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24-1/2″
Length (base of collar to hem): 25″

 photo IMG_0068.jpg photo IMG_0069.jpg

 photo IMG_0070.jpg

 photo IMG_0072.jpg

 photo IMG_0073.jpg

 photo IMG_0074.jpg

 photo IMG_0075.jpg

 photo IMG_0076.jpg

 photo IMG_0077.jpg

 photo IMG_0078.jpg

 photo IMG_0080.jpg

1920s hookless zipper front pullover Hudson’s Bay jacket

http://www.ebay.com/itm/271422243118
This vintage jacket was made in the 1920s. It was tailored from Hudson’s Bay point blanket material, at the time, one of the most expensive wools on the market, prized for its warmth and vibrant colors.
The jacket is a pullover style, with an A-1 style knit waistband. The separable-bottomed zipper was not introduced by Hookless/Talon until 1930. Prior to that point, if a manufacturer wanted a zip-front to a jacket, it had to be closed-bottomed, which meant a pullover style. This zipper is an extremely rare early Hookless, dating to the 1920s. It has a bent wire pull, probably meant for a leather pull attachment. This design pre-dated the grommet-zipper by a good five years or more.
It has a shirt style collar, with a long chinstrap, a detail borrowed from work clothing. The opening of the zipper has a layer of wool behind it to keep anything from becoming snagged in the teeth of the zipper. The Hudson’s Bay Company label bears the logo used in the 1920s, pre-dating the inclusion of registration numbers in the late 1920s.

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 21″ (Replacement of missing cuffs would probably bring length to 24-25″)
Length: 27″

 photo IMG_0119.jpg

 photo IMG_0120.jpg

 photo IMG_0001.jpg

 photo IMG_0121.jpg

 photo IMG_0123.jpg

 photo IMG_0125.jpg

 photo IMG_0131.jpg

 photo IMG_0126.jpg

 photo IMG_0133.jpg

 photo IMG_0128.jpg

 photo IMG_0130.jpg

Days Ranger Whipcord Crusier jacket

http://www.ebay.com/itm/271416155354
This vintage jacket was made in the 1950s by Day’s from “Ranger Whipcord”. It has a six pocket front, and a rear game pocket with zipper closed entry. The front does up with snaps, and the game pocket with Talon chain-style zippers. It is lined in a striped whipcord material, and bears a United Garment Workers of America union label in the inside breast pocket

Chest (pit to pit): 25″ (doubled = 50″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length (Base of collar to hem): 27″

 photo IMG_0088.jpg

 photo IMG_0089.jpg

 photo IMG_0090.jpg

 photo IMG_0091.jpg

 photo IMG_0092.jpg

 photo IMG_0093.jpg

 photo IMG_0094.jpg

 photo IMG_0095.jpg

 photo IMG_0084.jpg

 photo IMG_0085.jpg