http://www.ebay.com/itm/271872414732
made in the 1930s. It is made of canvas, with taped seams, heavy webbing straps, riveted to the bag, and with a buckle closure on one side to make taking the bag off and putting it on easier. There is a zippered pocket with an early style round hole Talon zipper, a re-tooling of earlier Hookless dies. The name Robert Brunelle is written inside the top of the bag.
http://www.ebay.com/itm/281399908235
This vintage jacket was made in the mid to late 1930s by the Woolrich Woolen Mills of Woolrich, PA. This is the rare 255 model, with caped shoulders, handwarmers with D-pocket stitching and flapped cargo pockets. It has exposed buttons and a rear game pouch. The coat, in keeping with many early mackinaw coats, is unlined.
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 18-1/2″
Sleeve (shoulder to cuff): 25″
Length (Base of collar to hem): 29″
http://www.ebay.com/itm/271469007778
This vintage hunting vest was made in the 1920s. It is made of brown canvas, with a five button front. There is a buttonhole at the back of the neckline, which I have not seen before on other vests. I wonder if it was there to attach something to the vest (or the vest to something else, like a jacket), or if it was there to hang the vest by? The vest has closed bottomed, canvas shotgun shell loops, which are typical of these early manufacture vests. At some point the vest was taken in, then let back out. The front buttons have been moved slightly from their original position to make the vest a smidge larger. Since garments like this were purely utilitarian, it wouldn’t be uncommon for them to be passed down from one generation to the next. I wonder if these modifications were made as the original owner lost and put on weight, or if they were done for a different owner?
Chest (pit to pit): 18-1/2″ (doubled = 37″)
Length: 19-1/2″
http://www.ebay.com/itm/281306020882
This vintage hunting vest was made in the 1950s. It was sold by Sears under the Active sportswear label. Due to similarity in design and construction to their product, I would guess that this was made under contract by the Empire Mfg. Co. It has two large cargo pockets on the front with shotgun shell loops inside. There is a game pouch on the back.
Chest (pit to pit): 21-1/2″ (doubled =43″)
Length: 24-3/4″
http://www.ebay.com/itm/271446932617
This vintage shirt was made by the Sawyer Barker Co. of Portland, Maine, makers of Pine Tree Brand garments.  They were known for their workwear and their cone denim overalls. They had a factory at 120-126 Center Street. The “Made in Maine for over 50 years” dates this shirt to the 1940s. Chest (pit to pit): 21″ (42″)
Tagged size: 16″
Collar: 15-1/2″
Shoulder to shoulder: 16-1/2″
Sleeve (Shoulder to cuff): 22″
Length (base of collar to hem): 28-1/2″
 
|
http://www.ebay.com/itm/271435185224
This vintage suit was made in the 1930s in Seattle, Washington by high end workwear and outdoor-garment manufacturer Black Bear Brand as part of their “Rain-Tite” water repellent clothes range. Black Bear Brand produced work shirts, pants, overalls, jackets and mackinaws from their plant on Rainier Ave. S. This suit is made from army duck canvas, the jacket from 10oz duck and the pants from 8 oz duck. It appears they both started out life a medium brown canvas, but years of wear and layers of waterproofing have darkened it. Both are extremely heavy duty, and are physically heavy and stiff, both from the material and from the wax proofing. The back of the jacket is two layers of the 10 oz canvas through the body, with three layers on the shoulders. The sleeves are two layers. It is constructed with overlapping capes and layers to keep everything dry in harsh weather. The pants are two layers as well. They are cut to be worn with tall boots. They have suspender buttons and belt loops. There is a crotch gusset, and a patch watch pocket inside the side pocket.
In the pocket of the pants, I found the package of a trolling spoon and an Elks matchbook advertising war bonds. This suit probably hasn’t been worn in a good 70 years or so if those are still in-tact in the pocket. The snaps are all branded “Union Made” as are all the buttons. There are union tags from the United Garment Workers of America inside the jacket and inside the flap of the back pocket of the pants. The waterproofing is still good- water beads up and falls right off. This type of suit was frequently worn by lumbermen in the North West. The heavy wear supports this. Going by the matchbook, the original owner of this one was probably from Vancouver.
Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder (under cape): 22″
Sleeve (Shoulder to cuff): 20″
Length (base of collar to hem): 28-1/2″
Waist: 17″ (doubled = 34″)
Inseam: 25″
Outseam: 38″
Rise: 13″
A similar suit in the 1920s in Alaska.  Photo from my collection 
http://www.ebay.com/itm/271324386244
This vintage fly fishing vest was made in the 1930s or 1940s. It is similar in cut and style to two made by Remington under the DriDux label which I recently sold, but no longer has a tag, so I can’t say for certain. It has a three button front, with two large wraparound cargo pockets. There is a flapped breast pocket. The other side has a felt pad to store flies in. Most have a simple piece of sheepskin, but this one snaps closed for greater storage and protection. The vest has a fly rod loop on one side, and a metal ring to attach gear to on the other.
Also see:Â https://vintagehaberdashers.com/2013/11/09/rem-dridux/
https://vintagehaberdashers.com/2013/10/26/hunting-and-fishing-jacket/
Chest (pit to pit): 22″ (doubled = 44″)
Length: 21-1/2″
http://www.ebay.com/itm/281204213687
This vintage mackinaw coat was made in the late 1920s or early 1930s by the Utica DuxBak corporation of Utica, New York. DuxBak was well known for its high quality garments for outdoorsmen. They were perhaps better known for their canvas coats, vests and pants, but their wool makinaws were of equally high quality. This is an early version, with a caped front, game pocket, and flapped patch pockets. The coat has a shirt style collar with a particularly tall collar stand. The collar is lined in cotton drill, and the underside of the collar is faced with the same material. The snaps are of a ring type. Handwarmer pockets are partially covered by the front cape, and are stitched in a reverse “D-pocket” style. The flaps on the game pocket have a narrow, sharply scalloped flap. The label is of a rare style, with a black background and red and green text.
Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 24″
Length: 28″
http://www.ebay.com/itm/281204172608
This vintage fishing vest was made in the 1930s or 1940s by Remington under the Rem DriDux label. The fabric was advertised as “snag-pruf” and as being guaranteed water repellent. There are pleated breast pockets, and wraparound double hip pockets. One has a divider with separate flaps, one has a single flap. There is a fly rod loop, a waist drawstring, pockets on each sleeve, and a roomy rear game pocket. Hanging from the fly rod loop is a pair of nail clippers, probably to cut fishing line with. There are two interior pockets. This type of vest was generally advertised as a sleeveless jacket or a sleeveless coat. I recently sold another by the same maker, sold under the “WeatherBak” label, which had sleeves.
Chest (pit to pit): 23″ (doubled = 46″)
Length: 23″
http://www.ebay.com/itm/281191411402
As someone who has been collecting and researching vintage hunting vests, this one strikes me as particularly interesting. It’s not as old as most of the ones I’m selling, probably dating from the 1960s, but it’s made in an earlier style. Although hunting vests were a purely functional garment and didn’t really change with fashion, certain details did change over time, largely with innovations in materials and hardware. By the time this vest was made, the closed bottomed canvas loops has largely been supplanted by elastic knit loops, which were easier and less expensive to construct, and lay flat when not in use. This vest has the older style loops, heavily reinforced at the bottoms. This vest is reinforced throughout with green textured naugahyde, making for extremely strong seams. Another unusual thing about this vest is its color. Most hunting vests of this type are in shades of brown canvas. This one is in a minty gray green with forest green trim. The vest has DOT snaps throughout, and a removable, vinyl lined game bag.
Chest (pit to pit): 21″
Length (with gamebag): 30″
Length (without gamebag): 22-1/4″
Vintage-Haberdashers Blog 