http://www.ebay.com/itm/401065824132
Chest (pit to pit): 22″ (doubled = 44″)
http://www.ebay.com/itm/401065824132
Chest (pit to pit): 22″ (doubled = 44″)
http://www.ebay.com/itm/401057315682
This vintage suit was made by Glenshore of Denver Colorado under their Saddle Sturdy Brand label. The suit is made of a fantastic brown fabrick with red, white and blue flecks. The suit has a three buton front, pleated pockets, a square cutaway, and front and back yokes.
http://www.ebay.com/itm/401057325562
This vintage western suit was made in the early-mid 1950s in Denver, Colorado by the Allen Mfg. Co. It is made from gray wool with a purple and brown fleck. The suit has a three button front, square cutaway, peak lapels, four western “smile” pockets and a yoked back. The pants have pearl snap back buttons, fancy pockets and western belt loops.
http://www.ebay.com/itm/401057330120
This vintage suit was made in the late 1950s-early 1960s by Gross of Denver. It is made from iridescent green and gold sharkskin, with a western cut. It has peak lapels and yokes front and back, with the pleats in the rear allowing for greater range of motion in the shoulders. The pants have pearl snaps on the back pockets and fancy western belt loops.
http://www.ebay.com/itm/401057434301
This vintage suit was made in the 1970s and was sold by Grassfield’s of Denver, Colorado. Made from an incredibly heavy herringbone tweed with a subtle rust colored stripe, it has a two button front and fully lined pants. The jacket is half-lined. Very professorial, and obviously very expensive and high quality when new.
http://www.ebay.com/itm/272032155246
This vintage overcoat was made in September of 1943 by Blum and Nelson, the US National Bank Building, Denver, Colorado. It is double breasted, with a 3×6 closure and a breast pocket.
Chest (pit to pit): 27″ (doubled = 54″)
Shoulder to shoulder: 21″
Sleeve (shoulder to cuff): 25″
Length (Base of collar to hem): 43-1/4″
http://www.ebay.com/itm/400944277463
This vintage suit was made in the late 1940s in Denver, Colorado by the Allen Mfg. Co. It is made of 100% Virgin Wool gabardine. This style of western suit came into being just after WWII, and was sort of a greatest hits version of details of 1930s suits, with its saddlebag patch pockets, wide peak lapels, bi-swing shoulders and suppressed waist. The square cutaway, popular in the 1910s-1920s, gives the suit a western flair, as do the fancy pockets on the pants and the wide belt loops. The pants are flat front and cuffless.
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24-1/4
Length (base of collar to hem): 29″
Waist (side to side): 18″ (doubled = 36″)
Outseam: 42″
Inseam: 30-1/2″ (3″ in hem, so probably about 2.5″ that could be let out)
Rise: 11.5″
http://www.ebay.com/itm/400949877547
This vintage suit was made in the 1930s in Denver Colorado by Allen Brand, maker of stockman’s garments. It is made of heavyweight mackinaw wool, with a waist length jacket. The jacket is button front, with a double button waistband and buttoned side adjusters. The pants are flat front, button fly, cuffless, and have western style belt loops. As was typical in this era of workwear and outerwear made from materials like this, the jacket and pants are unlined. The jacket has a honorable discharge “ruptured duck” pin in one lapel and an American Legion pin in the other. When I bought this suit, I was told that it was worn home after WWII by its original owner, and stored unworn since 1946.
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 23-1/2″
Length (base of collar to hem): 24-1/2″
Waist (side to side): 16″ (doubled = 32″)
Outseam: 40-1/2″
Inseam: 30-1/2″
Rise: 10″
http://www.ebay.com/itm/271906309034
This vintage jacket was likely made in Denver, Colorado in the 1950s. It is made of deerskin leather, and has all the unusual details which I have only found on Denver based custom makers, like the trapezoidal reinforcement stitching at the base of the bi-swing shoulders, the button front, the slightly narrower than typical belt to the half-belt back, the style of pleats to the back, the flapped patch pockets, the extra long cuffs, the seam in the lining at the belt-line. This one doesn’t have a label, but A.T. Hendrick is one of the Denver makers which also exhibit all the eccentricities of this pattern. I have had other jackets of theirs from the late 1930s and 1930s. This one feels a bit more refined, a bit later, but still has the distinctive detailing held over from the patterns of the 1930s, modified with a bit of extra length, an additional breast pocket, and tweaks to the collar.
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 25-1/2″
Length (base of collar to hem): 29-1/2″
http://www.ebay.com/itm/281606483003
This vintage jacket was made in the 1950 by the Allen Manufacturing Company of Denver Colorado (western made for westerners for over half a century). The jacket is made from camel colored wool blanket material, with a brown and turquoise striped pattern The jacket has a three button front, with peak lapels, handwarmer pockets concealed in pleats, flapped hip pockets, and fancy yokes front and back. It has a full quilted lining.
Chest (pit to pit): 21″
-Shoulder to shoulder: 17-1/2″
Sleeve (shoulder to cuff): 25-1/2″
Length (base of collar to hem): 32-1/2″