m1938 Jeep Coat Army Mackinaw

http://www.ebay.com/itm/271370848434
This vintage coat is an m1938 jeep coat, issued during WWII. The style descends from sheeplined canvas work coats and shawl collared mackinaws of the 1910s-1930s. It has a cotton shell and a wool lining. The coat has a double breasted front and a wide wool faced shawl collar. It is belted. There is a buttoned throat latch under the collar to secure it in cold weather, fastened with a riveted “wreath” button. Patches identify the original owner as a technical sergeant in the Army Service Forces.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25-1/2″
Length: 31-1/2″

 photo IMG_1143.jpg

 photo IMG_1144.jpg

 photo IMG_1145.jpg

 photo IMG_1147.jpg

 photo IMG_1148.jpg

 photo IMG_1149.jpg

 photo IMG_1150.jpg

 photo IMG_1151.jpg

Mid 1940s Albert Richard leather jacket

http://www.ebay.com/itm/271352480738
This vintage leather jacket was made by Albert Richard in the mid 1940s. It is made of “Chevro-Kid” goatskin. This trade name was typical of Albert Richards’s naming schemes during WWII and shortly after, playing of military terminology. The company could back this up- they produced flight jackets for the army and navy during the war. This jacket is made of the same goatskin used for these Navy flight jacket contracts. The jacket is a hip length style, with flapped saddlebag patch pockets , a straight yoke on the front, and a plain back. It was originally belted, but as with many jackets of this style, the belt is long since missing. The zipper is a Talon, with a mid 1940s stopbox and a slightly earlier style slider (these combinations were common at this period). The zipper is attached in the “surcoat” style, , where the end of the zip is attached to a triangle of leather which is free from the front of the jacket.

Chest (pit to pit): 21-1/2″ (doubled = 43″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length: 29-1/2″

A bit about Albert Richard, from an article I wrote for “The Art of Vintage Leather Jackets”.
Fried-Ostermann was founded c.1902 as a glove manufacturer. They bought out their competitor, Price Gloves, and relocated production of that company’s products to their original factory, located at 617-645 Reed Street, Milwaukee, WI. By 1915, the company had gained a partner, and was known as the Fried, Ostermann, Meyer Co, but that looks to only have lasted until 1917. As the company grew, they relocated to 1645 S. 2nd Street, Milwaukee, WI. Fried-Ostermann diversified out of gloves and into outerwear in the late 1920s with the formation of a new division of the company, called Albert Richard. The leather jackets, mackinaws, overcoats and sportswear produced by Albert Richard would soon come to eclipse the glove-making side of the company. Pre-war advertising stressed health and sports, with endorsements from college football players. These ads also talk about bringing items of clothing which were previously thought of as workwear, like mackinaws and leather jackets, into the realm of ordinary streetwear, citing their comfort and durability.
During WWII, the Albert Richard factory made A-2 (contract AC 23383), M-422A (contract 1406A), M444A and M445A flight jackets under the name of their parent company, Fried-Ostermann. They advertised leather jackets, overcoats and sportswear heavily during WWII, giving their jackets model names like the “Spitfire” and the “Meteor”. During the war, the company gave away wall-sized posters showing a range of american military airplanes. 850 workers were employed by Albert r in 1946, with plans to hire another 400. The company was one of the first to use fiberglass insulation in coats, a technology borrowed from b-29 bombers. Sheepskin collared “storm coats” became a signature model after the war.
President of Fried-Ostermann, Richard Fried, sold their Albert Richard Division to the Drybak corporation of Binghampton, NY in late 1952. Drybak, a maker of canvas hunting clothing was looking to diversify their line. In the deal, they got the licensing, branding, patterns, dealership network, but other than the Vice President and designer for Albert Richard, all of the employees and equipment stayed at the plant in Milwaukee. Fried-Osterman re-focused the attention of their plant on the production of gloves, and on producing leather jackets under house labels for mail order and department stores.
Starting in 1953, under Drybak’s ownership, Albert Richard clothing was once again produced, this time under contract at a factory in New Jersey, which Drybak declined to name. The plan at that time was to have production moved to New York by 1954. Labels were changed in this period to read “Albert Richard by Drybak”. In 1955, Drybak acquired the Martin Mfg. Co. in Martin, TN. They closed their Binghamton operations in that same year and relocated their hunting clothing manufacturing and their Albert Richard division to the Tennessee plant to take advantage of the lower labor costs in the south. Production was low, and this new plant closed almost as soon as it opened.

 photo IMG_0087.jpg

 photo IMG_0088.jpg

 photo IMG_0089.jpg

 photo IMG_0092.jpg

 photo IMG_0093.jpg

 photo IMG_0094.jpg

 photo IMG_0095.jpg

 photo IMG_0096.jpg

 photo IMG_0097.jpg

Mid 1940s Woolrich Mackinaw

http://www.ebay.com/itm/281204865336
This vintage Woolrich coat was made in the mid 1940s in Woolrich, Pennsylvania. After extensive research and collecting, I have put together a comprehensive guide to dating the labels and details of these coats. This style label, with a skinny sheep, was used in the later days of WWII through until about 1947. After 1947, the logo was changed with a new design of sheep, and to include the (R) symbol. Still produced today, this model of Woolrich mackinaw has changed very little since the turn of the last century, so details must be relied upon to give accurate dating. The label is the big one, definitively pinning it down to the mid 1940s. The jacket features the early style asymmetric breast pockets. Woolrich switched over to two large breast pockets in the 1960s. This coat has a rarely seen style of snap for this type of coat, a plain design made by United Carr, used during the war years, transitional between the pre-war “meander” style and the post-war ones branded with the Woolrich name.

The coat has a large, rounded collar with a buttoned throat latch. It has covered buttons save for the top. All the pockets have snaps. The vertical pockets on the front pass through to the internal game pouch, which can also be accessed from the rear. The coat has a full mustard colored lining.

Chest (pit to pit): 24″
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 25″
Length: 29″

 photo IMG_0190.jpg

 photo IMG_0191.jpg

 photo IMG_0192.jpg

 photo IMG_0194.jpg

 photo IMG_0195.jpg

 photo IMG_0196.jpg

 photo IMG_0197.jpg

 photo IMG_0198.jpg

 photo IMG_0199.jpg

 photo IMG_0200.jpg

 photo guide.jpg

Battered A-2

http://www.ebay.com/itm/281204190634
This vintage A-2 leather flight jacket was made during the 1940s. It has a spring-loaded zipper introduced in 1943 by Crown. This type, with “two-way” teeth, was designed exclusively for the military with larger versions finding their way onto the turrets of bombers to keep the wind out. Featuring this late-war military zipper, the jacket may have been private purchase. Snaps are of a ball style, and were made by Rau of Providence, Rhode Island, and have exposed backs. Pockets have nicely scalloped flaps, with the size tag stitched on the inside. The collar is long and pointed, and is attached directly to the body of the jacket The leather jacket hanger is off-center, stitched with “X” style stitching. The jacket has a khaki liner, which is in very good shape. Unfortunately, the original tag is long since missing.

Chest (pit to pit): 21″
Shoulder to shoulder: 17″
Sleeve (shoulder to end of knit cuff): 24-1/2″
Length (base of collar to end of knit cuff): 23″

Also see: https://vintagehaberdashers.com/2013/03/08/original-a2-leather-jacket/

 photo IMG_0070-1.jpg photo IMG_0071-1.jpg

 photo IMG_0073.jpg

 photo IMG_0077.jpg

 photo IMG_0078-1.jpg

 photo IMG_0080.jpg

 photo IMG_0087.jpg

 photo IMG_0088.jpg

 photo IMG_0089.jpg

 photo IMG_0090.jpg

 photo IMG_0092.jpg

 photo IMG_0095.jpg

 photo IMG_0099.jpg

 photo IMG_0103.jpg

 photo IMG_0104.jpg

Soo Woolen Mills plaid surcoat

http://www.ebay.com/itm/281198324999
This vintage plaid mackinaw coat was made by the Soo Woolen Mills of Sault Ste. Marie, Michigan immediately after WWII. It has a surcoat zipper attachment and length. The main zipper is a rare transitional talon- with a Talon marked stop box of the type used in the mid-late 1940s. The main zip has a square sided, square holed puller, a type used very briefly as they were transitioning between the square edged pullers with a small hole and round ended pullers with a larger hole. The pockets zip with bell shaped, round holed Conmar zippers. The overall cut of the coat is interesting, with its long rear pleat topped with triangle reinforcing stitching and a belted, buttoned back. Most plaid mackinaws were of very traditional designs which changed very little over the years. This particular Soo model was very modern and sport for the time it was made. It is lined in red flannel, and is marked young adult age/size 20, which going by the measurements, is about a men’s size 44 short.

Chest (pit to pit): 25″ (doubled = 50″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23-1/2″
Length: 28″

 photo IMG_0035-2.jpg

 photo IMG_0036-1.jpg

 photo IMG_0043-3.jpg

 photo IMG_0044-1.jpg

 photo IMG_0045-2.jpg

 photo IMG_0046-2.jpg

 photo IMG_0047-3.jpg

Alpaca lined shawl collar mackinaw

http://www.ebay.com/itm/281195223460

This vintage coat was made in the 1930s. While I have seen several of this particular model, none have had any tags. Originally, these coats were known as “sheeplined” coats, and were popular with railroad men, ranchers and other men who worked outdoors, as they were light for their warmth when compared to wool coats, and were particularly hard wearing. This one defies that name slightly by having an alpaca pile lining and collar. As is typical of the style, instead of buttonholes, this coat has loops, in this instance made from leather. Likewise, the pockets are reinforced with leather. There is a waterproof layer in between the outer canvas layer and the inner warm lining. In lieu of a tag, there is a military style size stamp at the bottom of the coat.

Chest (pit to pit): 34″
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 26-1/2″
Length: 33″

 photo IMG_0061.jpg

 photo IMG_0065.jpg

 photo IMG_0063-1.jpg

 photo IMG_0064.jpg

 photo IMG_0066.jpg

 photo IMG_0067-1.jpg

 photo IMG_0069.jpg

 photo IMG_0070.jpg

 photo IMG_0071-1.jpg

 photo 193101Stitch-2.jpg

 photo Image199Stitch-1.jpg

Early 1940s half-belt leather jacket

http://www.ebay.com/itm/271264162910
This vintage leather jacket was made in the early 1940s. Unfortunately, the maker’s tag is long gone, but it can be fairly accurately dated using other details. In one of the pockets is a union tag from the Amalgamated Clothing Workers of America. The last digit of the tag is mis-printed, but I believe it’s a 1939 tag, not a 1936. This puts the dating between 1939, when that tag first came into usage, and 1949, when it was replaced by a different design. The zipper is a spring loaded crown zipper, of the type used in the early 1940s, notably on several contracts of Army Air Force A-2 flight jackets. That narrows the dating from about 1939 to 1945.

The leather, still nicely soft and supple, has developed a nice fade and patina from its original russet brown color through decades of wear. The wear is heaviest on the neck of the collar, the hem and the cuffs. The jacket’s design is a classic: half belt back with side belt adjusters. The back has pleats to bring it in at the waist. On the front, there are two small flapped pockets, with double stitching to give them the look of patch pockets. Above them are buttoned, vertical chest pockets. The pockets are lined in a soft cotton flannel, and are presumably designed as hand-warmers. The body of the jacket is lined with plaid cotton in cream, blue and brown, and the sleeves in plain cotton.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 28″

 photo IMG_0074.jpg

 photo IMG_0075.jpg

 photo IMG_0078.jpg

 photo IMG_0080.jpg

 photo IMG_0081.jpg

 photo IMG_0083.jpg

 photo IMG_0084.jpg

 photo IMG_0085.jpg

 photo IMG_0086.jpg

 photo IMG_0087.jpg

 photo IMG_0089.jpg

Late 1930s belted leather jacket

http://www.ebay.com/itm/281154502621
This vintage leather jacket was made in the late 1930s or early 1940s. Whereas many jackets of this era either had a button on belt, or a half-belt back, this one has a full attached belt. It has an action back It has two buttoned vertical pockets on the chest, and flapped buttoned pockets. The front is done up with a deco sunburst Talon zipper, which helps pin the date down. The jacket is fully lined. Though the tag is missing, the leather on this jacket feels like other horsehide jackets of this era I’ve had. The leather has developed a great patina over time, and the grain has really started to pop on the back panels.

Chest (pit to pit): 21″
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 25-1/2″
Length: 25-1/2″

 photo IMG_7427.jpg

 photo IMG_7428.jpg

 photo IMG_7429.jpg

 photo IMG_7431.jpg

 photo IMG_7432.jpg

 photo IMG_7435.jpg

 photo IMG_7436.jpg

 photo IMG_7437.jpg

WWII USN swimsuit

http://www.ebay.com/itm/271226583409
These vintage swim trunks were late-war issue, made for the United States navy. They are wool, with a diamond shaped crotch gusset and belt loops. They have a modern web belt.

Waist (unstretched): 15″ (doubled = 30″)
Waist (stretched): 19″ (doubled = 38″)
Side Seam: 9″
Rise: 11″

 photo usn.jpg

 photo IMG_0115.jpg

 photo IMG_0116.jpg

 photo IMG_0117.jpg

WWII USN Swimsuit – 34

http://www.ebay.com/itm/281123619637
This vintage men’s swimsuit was made in the 1940s for sailors in the US Navy. This pattern was made under contract No. N140-62236s-20189B.
These were made out of 100% wool, but they have a softer hand to the fabric than some of the civilian models of the period. They have a high waisted cut. The flapped coin/key pocket is fastened with a catseye button. The front has a cotton lining, and there is a diamond shaped crotch gusset. There is a small moth nip at the bottom of the right leg, by the side seam. They have a drawstring waist.

Waist (unstretched): 14″ (doubled = 28″)
Waist (stretched): 20″ (doubled = 40″)
Side Seam: 10″
Rise: 15″

 photo IMG_0064.jpg

 photo IMG_0065.jpg

 photo IMG_0066.jpg

 photo IMG_0067.jpg

 photo IMG_0068.jpg

 photo dummy2.jpg