http://www.ebay.com/itm/281424920712
This vintage canvas bag was made in the 1930s. It has early talon zippers, with the D shaped stoppers at the top (before they switched to the solid metal stops in the ’40s) and a rare variant of the bell-shaped pull. The slider is of the plain-back style (no stampings) which was used in the early-mid 1930s. The end of the opening on the bag is leather reinforced. Unlike regular saddlebags, which are essentially two bags with a separate connection piece, these are a single, continuous bag, shaped roughly like a barbell. The ends are bucket-bottomed, and have drainage grommets both in the bottom and on both sides. The zippers open the entire bag and run vertically, as opposed to the horizontal openings usually seen on this type of bag. The heavy canvas started out life as a deep forest green, as can be seen in the last photograph, but has faded heavily over time. This is perfect for motorcycles or just as a rugged over-the shoulder carryall.
Tag Archives: hunting
1940s Woolrich Model 163 Shirt
http://www.ebay.com/itm/271576003573
This shirt was made in the early 1940s by the Woolrich Woolen Mills in Woolrich, PA. It is made of a lighter weight wool than most Woolrich shirts. It has fancy glass buttons instead of the usual red cateyes. The label on this shirt was only made in the early-mid 1940s.
Tagged size: 14-1/2″
Collar: 15-1/2″
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 16-1/2″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 32″
1940s Woolrich Model 93 shirt
http://www.ebay.com/itm/281412280608
This shirt was made in the early 1940s by the Woolrich Woolen Mills in Woolrich, PA. It is the heavy weight model 93 hunting shirt. The label on this shirt was only made in the early-mid 1940s.
Tagged size: 16″
Collar: 16-1/2″
Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 32″
1940s Seattle Woolen Company jacket
http://www.ebay.com/itm/281409416979
This vintage jacket was made in Seattle, Washington by the Seattle Woolen Company. The company was founded in 1891 by Thomas Eddy Eyanson and produced garments for rugged outdoor wear, catering to the flood of people leaving for Alaska through Seattle. They were the first woolen mill in Washington State, and were headquartered in Kirkland Washington, directly across from downtown Seattle. After Eyanson’s death in 1908, his son Edward Eyanson took over the mill. They produced fabrics for Filson as well as selling garments under their own name. Note the extreme similarity in label design between that of The Seattle Woolen Co and CC Filson of the same period.
The jacket is a waist length cut with peak lapels and a button front. The pockets are all trimmed in leather for extra durability. There are spacious canvas pockets inside.
Chest (pit to pit): 20-1/2″
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 22″
1930s Woolrich 255 plaid coat
http://www.ebay.com/itm/281399908235
This vintage jacket was made in the mid to late 1930s by the Woolrich Woolen Mills of Woolrich, PA. This is the rare 255 model, with caped shoulders, handwarmers with D-pocket stitching and flapped cargo pockets. It has exposed buttons and a rear game pouch. The coat, in keeping with many early mackinaw coats, is unlined.
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 18-1/2″
Sleeve (shoulder to cuff): 25″
Length (Base of collar to hem): 29″
Black Bear Brand cruiser jacket
http://www.ebay.com/itm/281379428091
This vintage cruiser jacket was made in the 1930s by Black Bear Brand, a high-end outdoor outfitter and workwear manufacturer from Seattle, Washington. The jacket has a four pocket front, an internal game pocket with rear access and an inside pocket. In the pocket is a faded United Garment Workers of America union label.
Chest (pit to pit): 22″
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 23-1/2″
Length (base of collar to hem): 28″
c.1940 Woolrich railroad vest
http://www.ebay.com/itm/281349001502
This vintage vest was made in Woolrich, Pennsylvania by the Woolrich Woolen Mills. Woolrich changed their label design frequently, which makes them easy to date if you know what you’re looking for. This variant on the label was used from about 1940-1945. The design of the United Carr snaps are also a giveaway for this vest’s date of manufacture. In the 1930s, Woolrich used snaps with one of two variations on a greek key pattern. During WWII, they switched to a plain topped design, featured on this vest. Starting in the late 1940s, Woolrich switched to snaps bearing the Woolrich name, before switching back to a different variation on the plain topped snaps in the 1960s. The design of the back of the snap further confirms this dating.
The vest is made of Woolrich’s signature mackinaw wool. The vest has a snap front, and bound seams. Although some examples you see are the sleeved variation with the sleeves removed, the construction on those is different. The vest has a belt adjuster back and asymmetric top and bottom patch pockets. Comparisons to Brown’s Beach Jacket vests of the same period are inevitable. This vest has a single large interior pocket.
Woolrich still makes a version of this model, however, the snaps have given way to a zipper, the cut has been lengthened, the armholes lowered, the shape of the front and rear changed, the wool fabric is now a blend, the pockets are a different shape, the construction is different and the taped seams altered. There is really no comparison the the original.
Chest (pit to pit): 20″ (doubled = 40″
Length (back) 20-1/2″
Length (front): 23-1/2″
1950s Bullseye Bill fishing jacket
http://www.ebay.com/itm/281337372551
This vintage jacket was made in the 1950s and was sold under the “Bullseye Bill” label. I have had several of these jackets, dating from the 1930s-1950s, and other than the hardware and labels, the overall design barely changed. This one has a “Wiz” zipper front, where as earlier models generally had button fronts. There are pockets on both of the arms, wraparound pockets, a large rear game pocket, a breast pocket, fly rod loop and a sheepskin patch for flies. There is a D-ring on the back of the jacket to attach further gear to, and two internal patch pockets Most people who wear these as streetwear remove the fly pad. This one is made of light, summer weight canvas.
In case if you don’t know wher to buy water shoes for this part.
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24″
Length (base of collar to hem): 22″
1920s high-neck buckle-back hunting vest
http://www.ebay.com/itm/271491035755
This vintage hunting vest was made in the 1920s. It is made from canvas, with thirty four closed bottomed shotgun shell loops. It has a high necked closure to keep out the elements, similar to the Browns Beach vests of the period, which were also designed for hunting. The vest has a buckle back. An ink-stamped canvas tag identifies this as a size 40.
Chest (pit to pit): 21″
Length: 19-1/2″
Merrill Woolens plaid jacket
http://www.ebay.com/itm/271489386897
This vintage jacket was made in the 1940s by Merrill Woolens of Merrill, Wisconsin. With its square bottom, boxy cut, and coat style collar, the cut is reminiscent of a Hollywood jacket. The plaid fabric and zipper breast pocket put it in a woodsier category altogether.
Chest (pit to pit): 21″
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24-1/2″
Length (base of collar to hem): 30″








































































