Ralph Lauren chinstrap workshirt

http://www.ebay.com/itm/271245777345
This shirt was made by Ralph Lauren and is a reproduction of a 1920s or 1930s work shirt. It is made of a black and white checked cotton, with a chinstrap collar stand, a point collar, two breast pockets, tail gussets, and curved front tails with a placket that ends after the 5th button down.

Chest (pit to pit): 25″
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 26″
Collar: 16-1/2″

 photo IMG_5668.jpg

 photo IMG_5669.jpg

 photo IMG_5670.jpg

 photo IMG_5671.jpg

 photo IMG_5672.jpg

Ralph Lauren chambray ’20s style jeans

http://www.ebay.com/itm/281132708711
These jeans were made by Ralph Lauren Polo. Their style in influenced heavily by the workwear styles of the 1920s and 1930s They are lightweight chambray with mother of pearl buttons. They have a button fly, suspender buttons and a buttoned rear pocket. There is a watch pocket with a keyhole buttonhole to but a t-bar watch chain through. They have plaid cotton pocketbags, a triple stitched inseam, and a lightly distressed finish, with faint “ink splatter”. They are tagged a size 34×32, but measure a 36×32.

Waist: 18″ (doubled = 36″)
Inseam: 32″
Outseam: 43″
Rise: 11″

 photo IMG_0347.jpg

 photo IMG_0348.jpg

 photo IMG_0349.jpg

 photo IMG_0351.jpg

 photo IMG_0352.jpg

 photo IMG_0353.jpg

 photo IMG_0354.jpg

Levi’s Type 1 jacket reproduction

http://www.ebay.com/itm/271202863443

This jacket was made by Levi Strauss and Co.. It is a reproduction of their Type 1 denim jacket, produced from the turn of the century until it was supplanted by the Type II in 1956. It has a pleated front, single breast pocket, and buckle back. This one has a slider buckle instead of the pronged type like the original would have had. The denim is factory distressed, as are the buttons. The styling makes me think LVC repro, but the combination of the small “E” on the red tab, non selvedge denim, and the 70535-9954 model no. on the tag make me wonder if it might just be a short-lived reissue by the main branch of the company.

Chest (pit to pit): 24″
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 26″
Length (Base of collar to hem): 25″

 photo IMG_1751.jpg
 photo IMG_1752.jpg
 photo IMG_1753.jpg
 photo IMG_1754.jpg
 photo IMG_1755.jpg
 photo IMG_1757.jpg

Denim half-belt utility jacket

http://www.ebay.com/itm/281101026594

This vintage jacket was made postwar, probably in the late 1940s , but is nearly identical to the pattern of leather utility jackets popular prior to the war. It has slash handwarmer pockets and a diagonal breast pocket. There is a half-belt with side adjuster belts, and bi-swing shoulders. In front is a brass talon zipper, which still works well. The jacket is made of a herringbone stripe blue denim. It’s interesting that the panel underneath the halfbelt has the pattern running 90 degrees to the rest of the jacket, providing visual contrast.

Chest (pit to pit): 25″
Shoulder to shoulder: 20-1/2″
Sleeve (shoulder to cuff): 25″
Length (bottom of collar to hem): 25″

 photo IMG_0013.jpg
 photo IMG_0015.jpg
 photo IMG_0016.jpg
 photo IMG_0018.jpg
 photo IMG_0022.jpg
 photo IMG_0023.jpg
 photo IMG_0025.jpg

Blue European Workwear jacket

http://www.ebay.com/itm/281096463565

This German work jacket has some very interesting detailing. When you first put it on, you’ll notice the buttons. They’re on the left side of the jacket instead of the right. They button through one set of buttonholes on the right placket, then through a second set, on a fly on the right side, bringing them back to where they belong, and entirely sealing the front of the jacket up from gusts of wind and dust. The jacket is caped, with the cape forming the pocket flaps of the breast pocket. The lining of the cape is rubberized. Underneath, in the front and back, are a set of pass through slits, possibly for a harness of some kind. The collar has a button throat latch underneath. The cuffs are an unusual design, again allowing for a tight seal with no gaps. It has elbow reinforcements, an internal waist adjuster drawstring, and interior cargo pockets.

Chest (pit to pit): 21″
Shoulder to Shoulder: 17″
Sleeve (shoulder to cuff): 24″
Length: 27″

 photo IMG_8370.jpg
 photo IMG_8372.jpg
 photo IMG_8373.jpg
 photo IMG_8374.jpg
 photo IMG_8375.jpg
 photo IMG_8376.jpg
 photo IMG_8377.jpg

Hydro Duck Canvas Coat

I sold this to a friend of mine at school.

Blaze orange canvas, reversible to hunting plaid. Clix zips on the game pouch and sleeve pocket. Leather reinforcement on the pockets. Made by Weather Chief. Supposedly water proof/resistant. I put that to the test by wearing it in light rain and found it to be patently false. Canadian Wildlife Federation patch, and some nice fade to the canvas.

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket