http://www.ebay.com/itm/400999730982
This vintage jacket was made for Penney’s and was sold under their Big Mac workwear label. It is made from Sanforized cotton twill with a wool blanket lining and a Talon zipper front.
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 25″
http://www.ebay.com/itm/271994241318
This vintage coat was made in the 1920s. It is made from heavyweight mackinaw wool, and from its rugged material and cut, was probably intended more as a working overcoat than a dress one. It is double breasted, with a relatively narrow wrap, a broad collar and beautiful brown buttons. It has a buttoned rear belt, which likely buttoned to segments to form a full belt. As is typical of coats which had the option of wearing with or without, it only has the back belt. This coat has chunky buttoned adjuster belts at the wrists, flapped cargo pockets and is un-vented. Typical for mackinaws and work coats of the time, it is unlined save for the sleeves, with the warmth coming from the heavy weight of the dense wool. This one ended up selling for hardly anything after a bidder canceled his bid within hours of the end, revealing all the other bidders high bids and scaring off any potential new bidders.
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24-1/2″
Length (Base of collar to hem): 43″
http://www.ebay.com/itm/400986781937
This vintage shirt was made in the late 1930s by the Woolrich Woolen Mills of Woolrich PA. It bears the variant of label which was used briefly in that period. It is a half-zip style, with a Talon zipper with a rectangular hole slider and a Talon marked slider/pull connector, a variant of zip used in the late 1930s. It is a size 15-1/2.
Tagged size: 15-1/2
Chest (pit to pit): 21″ (doubled = 42″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem):30-1/2″
http://www.ebay.com/itm/400986556489
This vintage cap was made in the 1920s – early 1930s and is marked “Extra Quality”. It is made of heavy mackinaw wool, with a one piece, eight pleat design, herringbone and fur lined earflaps and a snap brim. This type of cap is typical of fall/winter workwear caps of that era, and it is rare to find one in this large size and in wearable condition.
I bought these Levis LVC 1933 501XX jeans in December of 2012. They’re made from denim from the Cone Mills and were made in Turkey. A little over two and a half years on, they’re still hanging on, barely. I’ve worn them pretty hard in that time. In the wood shop, metal shop, while doing construction, while building architectural models, etc. So they’ve had a rough life. That said, they’ve still worn out faster than any other pair of jeans I have owned. They’ve worn through in the crotch, knees, thighs and seat. A rivet fell out of the pocket fairly early on, the stitching has come undone on about half of the pocket accurate, and there are many spots worn so thin that I’m sure another round of patches is due before too long. 
http://www.ebay.com/itm/281614480484
This vintage shirt was made in the late 1910s- mid 1920s. It is made of red wool, in a pullover style, with a convertible collar and buttoned breast pockets. This style of convertible collar, designed to be worn either buttoned up, or worn spread for a look similar to the lumberjack jackets of the time, was briefly popular on workshirts in this time frame. The shirt has a bold reinforcement panel, stitched so that it doubles as a small third pocket.
Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 27-1/2″
http://www.ebay.com/itm/281614503389
This vintage plaid mackinaw coat was made in the mid 1930s for Sears under the Hercules workwear label. This coat was also made under the Fieldmaster hunting label for Sears at the same time, however the hunting version has a game pouch, while this, the workwear version, does not. The coat is made from red and black plaid mackinaw cloth, with double shoulders and two-way pockets (top entry cargo pockets over side entry handwarmers). As was typical of work coats of this period, it is unlined.
Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25″
Length (base of collar to hem): 30″
http://www.ebay.com/itm/281606678401
This vintage shirt was made in the 1930s for Montgomery Ward. It is made from a red and black wool buffalo plaid. It has two breast pockets, square cut, jacket style tails, large cat-eye buttons and the streamlined MW Montgomery Ward logo.
Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder:17-1/2″
Sleeve (shoulder to cuff): 23-1/2″
Length (base of collar to hem): 26″
This vintage shirt was made in the 1930s for Montgomery Ward. It is made from a red and black wool buffalo plaid, with a cotton lined collar stand. It has two breast pockets, gusseted tails and Montgomery Ward’s name in a script logo.
Chest (pit to pit): 23-1/2″ (doubled = 47″)
Shoulder to shoulder:17-1/2″
Sleeve (shoulder to cuff): 21-1/2″
Length (base of collar to hem): 31″
This vintage shirt was made in the 1930s by Cascade Brand. It is made from a red and black wool buffalo plaid, with a cotton lined collar stand. It has two breast pockets and gusseted tails.
Chest (pit to pit): 23″(doubled = 46″)
Shoulder to shoulder:17″
Sleeve (shoulder to cuff): 20″
Length (base of collar to hem): 26″
http://www.ebay.com/itm/281590428441
This vintage mackinaw was made in the 1920s or 1930s. It is double breasted, with a shawl collar and patch pockets. It has a Western Costume – Hollywood, California stamp, along with the word “CHAR” and the number “1900” written inside by the sleeve head. This coat was used in Hollywood film productions. There is heavy staining and period repairs to the back. At some point in its more recent history, it was sound as part of Ralph Lauren’s vintage collection.
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder:17″
Sleeve (shoulder to cuff): 25″
Length (Base of collar to hem): 28″
http://www.ebay.com/itm/281590439297
This vintage shirt was made by the J.O. Ballard woolen mills of Malone, New York. It is made of a red and green plaid. It has flapped breast pockets, a chinstrap (extension collar stand) and vertical keyhole buttonholes.
J.O. Ballard was founded in 1888 by Jay Olin Ballard, and traded alternately under the J.O Ballard name and the name, Malone Woolen Mills. The company began making wool outdoorsman’s breeches in 1891 and followed up with mackinaw coats like this one. They were famous for their Malone plaid- gray with red and green overchecks. Coats of this cut were advertised to hunters, hikers, mountain climbers, lumberjacks, workmen and all other stripes of outdoorsmen. The depression closed the company in 1933. It re-opened again in 1935 with the assistance of an Reconstruction Finance Corporation loan, a depression era loan program.
Collar: 15″
Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length (base of collar to hem): 28″
Vintage-Haberdashers Blog 