http://www.ebay.com/itm/281267809462
This vintage hunting vest was made in the 1910s-1920s by the Williamsport Leather Goods Company of Williamsport, PA. It has loops for thirty two shotgun shells and a six button front. The back has an adjustment belt and buckle. The original owner sewed a canvas bag to the back of the vest as a game pouch. The bag has a leather belt closure, and two pockets, one with a mesh bottom, the other solid. The style of label helps date the vest to the late 1910s- mid 1920s. The maker of this vest ceased production in 1927, so it can not date any newer than 87 years old.
The Williamsport Leather Goods Company had a factory at 941 Nichols Place and a store or office at 506 5th Avenue, Williamsport, PA. It was run by Charles C. and Howard E Krouse.The factory burned on April 29, 1927, with a loss in excess of $325,000. They did not rebuild.
Chest (pit to pit): 20″ (doubled = 40″)
Tag Archives: Pennsylvania
Early 1930s Woolrich Hunting Breeches
http://www.ebay.com/itm/281204924506
This pair of vintage hunting breeches was made in the early to mid 1930s by Woolrich. These pants feature the earliest Woolrich tag variant I’ve been able to find, used in the early 1930s, and still bearing the John Rich and Bros. name. While most companies did not put zippers into pants until a big advertising push by Talon in the late 1930s, these were made with a zipper fly and zip-up legs. All three zippers are heavy fan-shaped versions with a pin lock. In addition to the zippers, the ends of the breeches lace up. The pants have the early style metal suspender buttons with the “All Wool” text cast in. Later, Woolrich would switch over to plain suspender buttons. Someone has enlarged the waist of these, using heavy duck canvas, of the type used on tents and other hunting garments. They have also added a knit section from the waistband by the left pocket down to the center seam, the purpose of which I have been unable to determine. The breeches have a reinforced seat and knees and buttoned, flapped rear pockets.
Waist: 19″ (doubled = 38″)
Inseam: 28-1/2″
Outseam: 40″
Rise: 11-1/2″
Mid 1940s Woolrich Mackinaw
http://www.ebay.com/itm/281204865336
This vintage Woolrich coat was made in the mid 1940s in Woolrich, Pennsylvania. After extensive research and collecting, I have put together a comprehensive guide to dating the labels and details of these coats. This style label, with a skinny sheep, was used in the later days of WWII through until about 1947. After 1947, the logo was changed with a new design of sheep, and to include the (R) symbol. Still produced today, this model of Woolrich mackinaw has changed very little since the turn of the last century, so details must be relied upon to give accurate dating. The label is the big one, definitively pinning it down to the mid 1940s. The jacket features the early style asymmetric breast pockets. Woolrich switched over to two large breast pockets in the 1960s. This coat has a rarely seen style of snap for this type of coat, a plain design made by United Carr, used during the war years, transitional between the pre-war “meander” style and the post-war ones branded with the Woolrich name.
The coat has a large, rounded collar with a buttoned throat latch. It has covered buttons save for the top. All the pockets have snaps. The vertical pockets on the front pass through to the internal game pouch, which can also be accessed from the rear. The coat has a full mustard colored lining.
Chest (pit to pit): 24″
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 25″
Length: 29″
Mid 1930s Woolrich Mackinaw
http://www.ebay.com/itm/281204853617
This vintage Woolrich coat was made in the mid 1930s in Woolrich, Pennsylvania. After extensive research and collecting, I have put together a comprehensive guide to dating the labels and details of these coats. This style label, with a green border and the text “All Wool” was used briefly, from about 1935-1937. Still produced today, this model of Woolrich mackinaw has changed very little since the turn of the last century, so details must be relied upon to give accurate dating. The label is the big one, definitively pinning it down. The jacket features the early style asymmetric breast pockets. Woolrich switched over to two large breast pockets in the 1960s. The coat has the early style of United Carr snaps with a meander pattern on them. During WWII, Woolrich switched briefly to plain-topped ones, then to ones branded with their company name for the 1940s and 1950s.
The coat has a large, rounded collar with a buttoned throat latch. It has covered buttons save for the top. All the pockets have snaps. The vertical pockets on the front pass through to the internal game pouch, which can also be accessed from the rear. The coat has a full mustard colored lining.
Chest (pit to pit): 24″
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 23″
Length: 29″
1950s Woolrich plaid shirt
http://www.ebay.com/itm/271317611899
This vintage plaid shirt was made in the 1950s by the Woolrich Woolen mills of Woolrich, Pennsylvania. It was sold by the Goodwear Company of 177 Flatbush Avenue, Brooklyn, NY. The shirt is made of wool plaid, and has shrunk-down versions of the buttons found on the heavy hunting coats. Pockets have pointed flaps. The collar is lined in black twill.
Chest (pit to pit): 22″
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length: 31″
Stylepark Milan summer straw hat
http://www.ebay.com/itm/281104256366
This vintage milan straw hat was made in the 1960s by Style Park (New York), and was sold in Pennsylvania by John Wannamaker. It is a classic stingy summer style, with a striped hatband, and a teardrop crown. Inside is a ventilated leather sweatband, which is still in good shape, but is a bit dry, so don’t go flipping it inside out or anything like that. There is a tip liner with the Stylepark logo.
Size: 7-3/8
Brim Width: 2-1/8″
Ribbon Width: 1-7/8″
1940s John the Hatter custom fedora
http://www.ebay.com/itm/281104246632
This vintage fedora hat was made in the late 1940s or early 1950s by John the Hatter of Lancaster, Pennsylvania. It is made from high quality fur felt, with a self-felted “Cavanagh Edge”, a process no longer available. It has a diamond crease with front pinches, and medium width bow. There is a wind string. The button is still attached to the string, but the loop which cinches the wind string around the crown of the hat has come undone. Inside there is a reeded brown leather sweatband, stamped “John the Hatter, Lancaster, PA”. It is a high quality sweatband with extremely finely done stitching, and a taped (instead of stitched) rear seam, a detail typical of earlier manufacture hats. The stitching which holds the reed tape to the body of the hat has come away for the front half of the sweatband.
Size: 7-1/8
Brim Width: 3″
Ribbon Width: 1-1/8″
Crown Height: 5-1/2″






































































