Score Sportswear blue leather cafe racer

http://www.ebay.com/itm/271307306053
This vintage leather jacket was made in Toronto by either Score Sporting Goods of by its successor, Shields Sportswear. Without the label, it’s hard to say which incarnation of Harry and Lorne Shields’s company made it. The jacket has the interesting collar of this maker- a short rounded stand collar with a single-snap chinstrap. Most makers made the snap tab as an extension of the collar stand, rather than a second piece. The separate chinstrap is more of a holdover from 1930s leather jacket design. Side adjuster belts are another early style holdover found on this design. The elbows are reinforced with a second layer of leather. There are zip sleeves to keep wind and dust out when riding. Zippers are mismatched, with Canadian made Acme and Lightning zips on the pockets and sleeves respectively. The front zipper is a replacement, with a YKK tape and a vintage Talon slider. The lining is long since missing. The blue leather of this jacket sets it apart in a sea of black and brown leather jackets, as if the distinctive and rugged design wasn’t enough.

Chest (pit to pit): 22″ (doubled = 44″)
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 24″
Length: 23-1/2″

 photo IMG_0163.jpg

 photo IMG_0164.jpg

 photo IMG_0177.jpg

 photo IMG_0166.jpg

 photo IMG_0170.jpg

 photo IMG_0172.jpg

 photo IMG_0174.jpg

 photo IMG_0175.jpg

 photo IMG_0179.jpg

 photo IMG_0180.jpg

ClothCraft gray flannel sportcoat

http://www.ebay.com/itm/271307328400

This vintage gray flannel jacket was made in the 1950s by Joseph & Feiss under the ClothCraft label. The jacket bears a 1949 union label. It has a two button front, patch pockets, and a half lining.

Chest (pit to pit): 22″
Shoulder to shoulder: 18″
Sleeve (shoulder to cuff): 25-1/2″
Length: 31″

 photo IMG_0148.jpg

 photo IMG_0149.jpg

 photo IMG_0150.jpg

 photo IMG_0151.jpg

 photo IMG_0152.jpg

 photo IMG_0153.jpg

Block Sportswear corduroy jacket

http://www.ebay.com/itm/281195946202

This vintage jacket was made in California by Block Sportswear in the 1940s. It is brown narrow wale corduroy. It has a three button front and leather buttons. There are twin patch breast pockets and it is unvented. The jacket is fully lined.

Chest (pit to pit): 22″
Shoulder to shoulder: 20″
Sleeve (shoulder to cuff): 26″
Length: 32″

 photo IMG_0155.jpg

 photo IMG_0156.jpg

 photo IMG_0157.jpg

 photo IMG_0159.jpg

 photo IMG_0158.jpg

 photo IMG_0161.jpg

 photo IMG_0162.jpg

Gibson and Barnes A-2

http://www.ebay.com/itm/281195687466
This is an older Gibson & Barnes reproduction of a WWII Army Air Corps A-2 flight jacket. It is made of heavy russet brown leather, with dark brown knits. The pockets are authentic patch style, not the hand-warmer style they are currently using. The jacket has a one piece back. The jacket has a Scovill Gripper Zipper and Scovill snaps. The tag is long since missing, but the cut, detailing, hardware, and liner color and material identify it as an older G&B.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to Shoulder: 19″
Sleeve (shoulder to end of knit cuff): 25″
Length (to end of knit waistband): 24″

 photo IMG_0104.jpg

 photo IMG_0105.jpg

 photo IMG_0106.jpg

 photo IMG_0107.jpg

 photo IMG_0108.jpg

 photo IMG_0110.jpg

 photo IMG_0111.jpg

 photo IMG_0113.jpg

35th Engineers – Skyline jacket

http://www.ebay.com/itm/281195672861

This vintage jacket was made in the 1950s for a “Bill Story”, a member of the Army 35th Engineer Battalion. The 35th engineers were stationed in Germany from March of 1952 until early 1957, and the jacket dates from within that timeframe. It is satin, in air force blue, with white knit cuffs, collar and waistband. The jacket has a German made “Opti” zipper, the 35th crest embroidered on the back, (ability, courage, results) and the owner’s name embroidered on the front. The lining is quilted.

Chest (pit to pit): 24″ (doubled = 48″)
Shoulder to Shoulder: 19″
Sleeve (shoulder to cuff): 24″
Length: 20″

 photo IMG_0072-1.jpg

 photo IMG_0073.jpg

 photo IMG_0074-1.jpg

 photo IMG_0075.jpg

 photo IMG_0076.jpg

 photo IMG_0078.jpg

 photo IMG_0079.jpg

Melton Wintermaster two tone jacket

http://www.ebay.com/itm/271306991316
This vintage jacket was made in the USA by Melton, under their Wintermaster line. The overall lines of the jacket, with its two tone styling, unlined construction, pocket setup and back belt adjusters all suggest the 1940s or early 1950s, but the hardware points to a date of manufacture no older than the 1960s. This is probably a model that was kept in their product line with no major changes for a long time.

Chest (pit to pit): 23″ (doubled = 46″)
Shoulder to Shoulder: 19″
Sleeve (shoulder to cuff): 23-1/2″
Length: 25″

 photo IMG_0084.jpg

 photo IMG_0089.jpg

 photo IMG_0086.jpg

 photo IMG_0088.jpg

 photo IMG_0090.jpg

 photo IMG_0093.jpg

Hunting and Fishing jacket

http://www.ebay.com/itm/271306401483
This vintage jacket was made in the 1940s under the WeatherBak label. This style was designed for hunters and fisherman, with space for every possible need. The canvas is advertised as “snag-pruf”, and the picture on the label of a hunter in the rain, along with the brand name reinforces the idea of water resistance which goes along whit this kind of tight, high quality canvas. Although canvas will get wet in the rain, the fibers swell with moisture, making a tight fabric even tighter, not allowing the water to actually pass through. I took some canvas gear on a canoe trip in Nova Scotia a year and a half ago. It rained the entire trip and my vintage canvas duffle was soaked, but everything inside remained dry.

The jacket has a short cut. There are pleated breast pockets, and wraparound double hip pockets. One has a divider with separate flaps, one has a single flap. There is a fly rod loop, a waist drawstring, pockets on each sleeve, and a roomy rear game pocket. There are two interior pockets. Room to fit everything you own! The underarms have open bottoms, an alternative to gussets for greater range of motion.

Chest (pit to pit): 23″
Shoulder to shoulder: 19″
Sleeve (shoulder to cuff): 23″
Length: 21-1/2″

For a modern leather interpretation of this style, check out: http://fcancan.blogspot.com/2013/10/i-had-dream-part2.html

 photo IMG_0001.jpg

 photo IMG_0004-1.jpg

 photo IMG_0005-1.jpg

 photo IMG_0006-2.jpg

 photo IMG_0007-1.jpg

 photo IMG_0008-1.jpg

 photo IMG_0010-1.jpg

 photo IMG_0011-2.jpg

 photo IMG_0012.jpg

Late 1920s tweed jacket

http://www.ebay.com/itm/281195246419

This vintage jacket was made in the late 1920s or very early 1930s by Capps clothes. It is made of a bold herringbone tweed. The jacket has fishmouth peak lapels, a slanted breast pocket, and a three button front. The jacket is unvented, has a cotton petal lining with taped seams. The jacket is deadstock and still has the original tag, identifying the model as “York”, sewn under the collar. This is the perfect jacket for an upcoming tweed ride, tweed pub crawl or general autumnal wear.

Chest (pit to pit): 20″
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 24-1/2″
Length: 29″

 photo IMG_0027-2.jpg

 photo IMG_0030.jpg

 photo IMG_0028-2.jpg

 photo IMG_0029-2.jpg

 photo IMG_0032-1.jpg

 photo IMG_0033.jpg

 photo IMG_0034.jpg

 photo IMG_0035-1.jpg

 photo IMG_0036.jpg

 photo IMG_0037-1.jpg

 photo IMG_0038.jpg

 photo IMG_0039.jpg

East West Musical Instruments style leather jacket

http://www.ebay.com/itm/271306455788
This vintage leather jacket was made in the late 1960s – 1970s time frame, and is one of the coolest from that era I’ve seen in a long time. The western pictorial theme, with a desert landcape and a bird (or is that a “Gilded Palace of Sin” era Sneaky Pete pterodactyl?) put me in mind of Nudie’s rodeo tailors. The western yoking and brass studs on the front further that western theme. This style of jacket was pioneered by California’s “East West Musical Instruments” although this jacket isn’t nearly as complex as most of their output. There’s no, or evidence that there was one, so who actually made the jacket is a bit of a mystery. There is a standard style for the era “Medium” size tag. My guess would be it was made by a small custom leather shop. The jacket is leather, sewn rough-out. It has a snap front.

Chest (pit to pit): 21″ (doubled = 42″)
Waist: 18″ (doubled = 36″)
Shoulder to shoulder: 18-1/2″
Sleeve (shoulder to cuff): 24″
Length: 22″

 photo IMG_0013-2.jpg

 photo IMG_0015-1.jpg

 photo IMG_0014-2.jpg

 photo IMG_0016-2.jpg

 photo IMG_0017-1.jpg

 photo IMG_0018-1.jpg

 photo IMG_0019-2.jpg

 photo IMG_0020.jpg

 photo IMG_0026-1.jpg

Mid-Western Sport Togs deerskin jacket

http://www.ebay.com/itm/271306482905
This vintage jacket was made by Mid-Western Sport Togs, of Berlin, Wisconsin, probably in the early 1960s. It is a western style, with a fringed hem, sleeves and yoke. The jacket is made of deerskin. At some point, the original buttons were changed out for the current metal eagle buttons.

Chest (pit to pit): 22″
Shoulder to shoulder: 17″
Sleeve (shoulder to cuff): 22″
Length (not including fringe): 25″

 photo IMG_0040.jpg

 photo IMG_0041-2.jpg

 photo IMG_0043-2.jpg

 photo IMG_0044.jpg

 photo IMG_0047-2.jpg

 photo IMG_0048-1.jpg